English
Language : 

PCJ Datasheet, PDF (1/2 Pages) Tyco Electronics – Miniature PCB Relay
General Purpose Relays
Miniature PCB Relay PCJ
I 1 pole 3 / 5 A, 1 NO contact
I Sensitive coil 200 mW
I 8 mm creepage / clearance
I Version for 105°C
I WG version: Product in accordance to IEC60335-1
I RoHS compliant (Directive 2002/95/EC)
as per product date code 0424
Applications
Domestic appliances
F0276-A
Approvals
V U REG.-Nr. 122301 ÜG
E58304
Technical data of approved types on request
Contact data
Contact configuration
Contact set
Type of interruption
Rated current
Rated voltage / max.switching voltage AC
Maximum breaking capacity AC
Contact material
Mechanical endurance
Rated frequency of operation with / without load
1 NO
single contact
micro disconnection
3A
5 A (WG-version)
250/400 VAC
750 VA
1250 VA
AgNi
10x106 cycles
30 / 300 min-1
Contact ratings
Type
Load
AgNi
3 A, 250 VAC, 90°C
AgNi
5 A, 250 VAC, 85°C, EN61810-1
AgNi
3 A, 250 VAC, 105°C, EN61810-1
AgNi
2 A, 250 VAC, cosϕ=0.6, 85°C, WG-version, EN61810-1
AgNi
5 A (1.5 A), 250 VAC, 85°C, WG-version, EN60730
Cycles
1x105
1x105
1x105
1x105
1x105
Coil data
Rated coil voltage range DC coil
Coil power DC coil
Operative range
Coil insulation system according UL1446
3...24 VDC
typ. 200 mW
2
A
F
Coil versions, DC-coil
Coil
Rated
Operate
Release
Coil
Rated coil
code
voltage
voltage
voltage
resistance
power
VDC
VDC
VDC
Ohm
mW
03
3
2.25
0.15
45+10%
200
05
5
3.75
0.25
125+10%
200
06
6
4.5
0.3
180+10%
200
09
9
6.75
0.45
405+10%
200
12
12
9
0.6
720+10%
200
24
24
18
1.2
2880+10%
200
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
Datasheet
Rev. FC1
Issued 2006/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
1
‘Schrack’ section.
Specifications subject to
change.