PCH_09 Datasheet, PDF (1/3 Pages) Tyco Electronics – Miniature Power PCB Relay PCH

General Purpose Relays
Miniature Power PCB Relay PCH
n 1pole 5 A, 1CO or 1NO contact
n Sensitive 200 mW coil available
n Version PCH-WG with tracking resistance PTI 250
on relay base and cover
n WG version: Product in accordance to IEC60335-1
Applications
Domestic appliances, heating control, building control,
measurement & control
SCHRACK
F_PCH_B
Approvals
V Z PCH / PCH-WG:
119568
Technical data of approved types on request
E82292
Contact data
Contact configuration
Contact set
Type of interruption
Rated voltage / max. switching voltage AC
Rated current
Limiting continuous current
Maximum breaking capacity AC
Contact material
Rated frequency of operation with / without load
Operate- / release time
Bounce time NO contact
PCH
PCH-WG
1 CO or 1 NO
single contact
micro-disconn.
250 / 400 VAC
5A
5 A, UL: 10 A
1250 VA
AgSnO2
6/600 min^-1
max. 10/5 ms
max. 10 ms
Contact ratings
Type
Contact
Load
IEC 61810
PCH-…2M-WG NO
PCH-…D2-WG NO of CO
PCH-…D2M NO
PCH-…L2M NO
PCH-…D2 CO
UL 508
PCH
NO
5 A, 250 VAC, cosϕ=1
5 A, 250 VAC, cosϕ=1
5 A, 250 VAC, cosϕ=1
5 A, 250 VAC, cosϕ=1
5 A/3 A, 250 VAC, cosϕ=1
5 A, 250 VAC, general use
Ambient Cycles
temp. [°C]
85°C
85°C
70°C
70°C
40°C
100x10³
100x10³
100x10³
30x10³
30x10³
85°C
100x10³
Coil data
Rated coil voltage range DC coil
Operative range to IEC 61810
Coil insulation system according UL1446
standard
sensitiv
5...48 VDC
5...24 VDC
1
class F
Coil versions, DC-coil - standard
Coil
Rated
Operate
Release
Coil
Rated coil
code
voltage
voltage
voltage
resistance
power
VDC
VDC
VDC
Ohm
mW
05
5
3.75
0.5
62.5+10%
400
06
6
4.5
0.6
80+10%
400
09
9
6.3
0.9
202.5+10%
400
12
12
8.4
1.2
360+10%
400
24
24
16.8
2.4
1440+10%
400
48
48
33.6
4.8
5760+10%
400
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
1
Dimensions are in mm unless Product specification
processing information only in the ‘Schrack’ section.
otherwise specified and are
according to IEC 61810-1.
to be used together with the
shown for reference purposes Product data, technical para- 'Definitions' section in the cat- Specifications subject to
only.
meters, test conditions and
alogue or at schrackrelays.com change.