PCH Datasheet, PDF (1/3 Pages) Tyco Electronics – Miniature Power PCB Relay

General Purpose Relays
Miniature Power PCB Relay PCH
I 1pole 5 A, 1CO or 1NO contact
I Sensitive 200 mW coil available
I Version PCH-WG with tracking resistance PTI 250
on relay base and cover
I WG version: Product in accordance to IEC60335-1
I RoHS compliant (Directive 2002/95/EC) as per
product date code 0424
Applications
Domestic appliances, heating control, building control,
measurement&control
Approvals
V Z PCH / PCH-WG:
119568
Technical data of approved types on request
E82292
Contact data
PCH
PCH-WG
Contact configuration
1 CO or 1 NO
Contact set
single contact
Type of interruption
micro-disconn.
Rated current
5A
Rated voltage / max.switching voltage AC
250/400 VAC
Maximum breaking capacity AC
1250 VA
Contact material
AgSnO
Mechanical endurance
1.5x10⁶ cycles
10x10⁶ cycles
Rated frequency of operation with / without load
6/600 min^-1
Contact ratings
Type
Load
PCH-XXXX2M-WG N/O, 5 A, 250VAC, 85°C, resistive, EN61810-1
PCH-XXXX2-WG C/O (N/O tested): 5 A, 250VAC, 85°C, res. EN61810-1
PCH-XXXD2M N/O, 5 A, 250VAC, 70°C, resistive, EN61810-1
PCH-XXXL2M
N/O, 5 A, 250VAC, 70°C, resistive, EN61810-1
PCH-XXXD2
C/O, 3 A, 250VAC, 40°C, resistive, EN61810-1
Cycles
100x10³
100x10³
100x10³
30x10³
30x10³
Coil data
Rated coil voltage range DC coil
Coil power DC coil
Operative range
Coil insulation system according UL1446
standard
sensitiv
5...48 VDC
5...24 VDC
typ. 400 mW
typ. 200 mW
1
class F
Coil versions, DC-coil - standard
Coil
Rated
Operate
Release
Coil
Rated coil
code
voltage
voltage
voltage
resistance
power
VDC
VDC
VDC
Ohm
mW
05
5
3.75
0.5
62.5+10%
400
06
6
4.5
0.6
80+10%
400
09
9
6.3
0.9
202.5+10%
400
12
12
8.4
1.2
360+10%
400
24
24
16.8
2.4
1440+10%
400
48
48
33.6
4.8
5760+10%
400
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
SCHRACK
F-PCH
Datasheet
Rev. HC1
Issued 2008/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
1
‘Schrack’ section.
Specifications subject to
change.