PCFN_09 Datasheet, PDF (1/2 Pages) Tyco Electronics – Power PCB Relay PCFN Solar

General Purpose Relays
Power PCB Relay PCFN Solar
n 1 pole, 26 A, 1 NO Contact
n Contact gap > 1.5 mm
n 200 mW hold power
n Ambient temperature up to 75°C, 85°C at 22 A
n The appliance is able to meet VDE V0126-1-1
SCHRACK
Applications
Photovoltaic inverter
Approvals
V Z REG.-Nr. A951,
E58304
Technical data of approved types on request
Contact data
Contact configuration
Contact set
Contact gap
Rated voltage
Rated current
Maximum breaking capacity AC
Contact material
Rated frequency of operation with / without load
Operate- / release time
Bounce time
1 NO
single contact
> 1.5 mm
277 VAC
26 A
7200 VA
AgSnO2
6 / 300 min^-1
max 20 / 10 ms
max 3 ms
Contact ratings
Type
Contact
IEC 61810
PCFN-1..H2MG NO
PCFN-1..H2MG NO
PCFN-1..H2MG NO
UL 508
PCFN-1..H2MG NO
PCFN-1..H2MG NO
Load
26 A, 277 VAC, cosϕ=1
22 A, 250 VAC, cosϕ=1
14 A, 250 VAC, cosϕ=1
26 A, 277 VAC, resistive
22 A, 277 VAC, resistive
Ambient Cycles
temp. [°C]
75°C
85°C
85°C
30x10³
30x10³
100x10³
75°C
85°C
30x10³
30x10³
Coil data
Rated coil voltage
Coil insulation system according UL 1446
12 VDC
class F
Coil version, DC-coil
Coil
Rated
Operate
Release
Coil
Rated coil
code
voltage
voltage
voltage
resistance
power
VDC
VDC
VDC
Ohm
W
12
12
7.8
1.2
96+10%
1.5¹⁾
All figures are given for coil without preenergization, at ambient temperature +23°C
Hold voltage W 4.4 V at ambient temperature w 85°C
1) _{Ambient temperature > 23°C requires reduction of coil voltage to 4.4...< 6 V after}
100ms
F_PCFN_B
Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
1
Dimensions are in mm unless Product specification
processing information only in the ‘Schrack’ section.
otherwise specified and are
according to IEC 61810-1.
to be used together with the
shown for reference purposes Product data, technical para- 'Definitions' section in the cat- Specifications subject to
only.
meters, test conditions and
alogue or at schrackrelays.com change.