NANOSMDC150 Datasheet, PDF (1/1 Pages) Tyco Electronics – PolySwitch PTC Devices Overcurrent Protection Device

Tyco / Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: [phone]
Fax: [phone]
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: nanoSMDC150
DOCUMENT: SCD 24573
PCN: 365226
REV LETTER: F
REV DATE: NOVEMBER 8, 2001
PAGE NO.: 1 OF 1
Specification Status: Released
Maximum Electrical Rating
Voltage: 6.0V_DC MAX
Short Circuit Current: 100A
Notes:
1. All terminations are Tin/Lead plated.
2. Devices cannot be wave soldered.
3. Drawing not to scale
Marking:
TABLE I. DIMENSIONS:
A
B
C
D
MIN MAX MIN MAX MIN MAX MIN
mm: 3.00 3.4 0.85 1.40 1.37 1.90 0.25
in: (0.118) (0.135) (0.033) (0.055) (0.054) (0.075) (0.010)
E
MIN
0.127
0.005
*Rounded off approximation
TABLE II. PERFORMANCE RATINGS:
CURRENT RATINGS**
TIME TO
TRIP **
AMPERES AMPERES AMPERES
AT 0°C
AT 25°C AT 60°C
HOLD TRIP HOLD TRIP HOLD TRIP
1.77 3.54 1.50 3.00 1.10 2.20
SECONDS
AT 25°C, 8.0A
MAX
1.0
RESISTANCE TRIPPED-STATE
VALUES
POWER
DISSIPATION**
OHMS
AT 25°C
MIN MAX*
WATTS AT
25°C, 6.0V
MAX
0.04 0.11
0.8
*Maximum resistance is measured 1 hour after reflow.
** Values specified were determined using PCB’s with 0.030”X1.5 ounce copper traces.
Reference Documents:
Precedence:
Effectivity:
CAUTION:
PS300
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.