MSR_05 Datasheet, PDF (1/3 Pages) Tyco Electronics – High inrush currents with AgSnO contacts

General Purpose Relays
Miniature Power PCB Relay MSR
I 1 pole 8 / 10 A, 1CO or 1NO contact
I High inrush currents with AgSnO contacts (TV4 = 65 A)
I 4 kV/8 mm coil-contact
I Reinforced insulation (protection class II)
I Ambient temperature up to 85°C at 8 A
I Plastic materials according to IEC60335-1 (domestic appliances)
I RoHS compliant (Directive 2002 / 95 / EC) as per
product date code 0404
Applications
HVAC, interface technology, power supplies, TV-/Monitor control,
computer-/communication technology, domestic appliances, Hi-Fi
products, timers
Approvals
V Z REG.-Nr. 3919,
E214024
Technical data of approved types on request
Contact data
Contact configuration
1CO or 1NO
Contact set
single contact
Type of interruption
micro disconnection
Rated current
versions A,B:
8A
versions C,D:
10 A
Rated voltage / max.switching voltage AC
240/400 VAC
Maximum breaking capacity AC
2000 VA
Limiting making capacity, max 20 ms
A302: 65 A
max 4 s, duty factor 10%
15 A
15 A
Contact material
Mechanical endurance
AgSnO2, AgCdO
AgNi0,15*
10x10⁶ cycles
Rated frequency of operation with / without load
6 / 1200 min^-1
*not recommended for AC loads with arcing (CC2 according prEN61810-2)
Contact ratings
Type
V23061-A1***-A302
V23061-C2***-A302
V23061-C2***-A302
V23061-A1***-A302
V23061-*****-A30*,
Load
Cycles
8 A, 250 VAC, resistive load, 85°C, 1 mm mountig
distance, 6 cycles min^-1, 50% duty factor, EN61810-1 100x10³
10 A, 250 VAC, resistive load, 85°C, 0 mm mountig
distance, 6 cycles min^-1, 50% duty factor, EN61810-1 10x10³
5 A, 250 VAC, resistive load, 105°C, 0 mm mountig
distance, 6 cycles min^-1, 50% duty factor, EN61810-1 100x10³
TV-4 Tungsten, 120 VAC, UL508
25x10³
240 VAC, A300, Pilot duty, UL508
6x10³
Coil data
Rated coil voltage range DC coil
Coil power DC coil
Operative range
Coil insulation system according UL1446
3...60 VDC
typ. 220 mW
2
Class A, Class F
Coil versions, DC-coil
Coil
Rated
Operate
Release
Coil
Rated coil
code
voltage
voltage
voltage
resistance
power
VDC
VDC
VDC
Ohm
mW
001
3
2.1
0.3
40+10%
225
002
5
3.4
0.5
118+10%
212
003
6
4.1
0.6
165+10%
218
004
9
6.1
0.9
364+10%
223
005
12
8.2
1.2
652+10%
221
007
24
16.3
2.4
2270+10%
254
009
48
32.6
4.8
8790+10%
262
010
60
40.8
6.0
15265+15%
236
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
Datasheet
Rev. EK1
Issued 2005/11
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
F0143-C
1
‘Schrack’ section.
Specifications subject to
change.