MS18-1006 Datasheet, PDF (1/2 Pages) Tyco Electronics – High Performance Solid State Relay

MS18-1006 High Performance Solid State Relay
DC & bi-directional solid state relay for loads up to 2A @ 80Vdc
Product Facts
I Bi-directional power FET
output.
I Optically coupled.
I Low on-resistance.
I Extremely low leakage
current.
I Subminiature hermetically
sealed package.
I Tested per MIL-R-28750 and
approved to DSCC drawing
89116-006.
The MS18-1006 is an opti-
cally coupled SSR employ-
ing power MOSFET output
chips in an inverse series
configuration for switching
DC or bi-directional loads. A
common source connection
is provided for the user to
configure the output
switching circuit for DC
operation up to 2A with very
low on-resistance. The relay
features fast switching
speeds, low off-state
leakage, virtually zero offset
voltage and the capability to
withstand high inrush
currents up to 350% of
rated. The low profile
subminiature package is
hermetically sealed with
pinouts on a 0.1” x 0.3” grid
pattern.
CII Part No. DSCC Dwg. No.
MS18-1006
89116-006
Relay Version
Basic relay
Environmental Characteristics
Ambient Temperature Range:
Operating: -55°C to +120°C.
Storage: -55°C to +125°C.
Vibration Resistance:
100 G’s, 10-2,000 Hz.
Shock Resistance:
1,500 G’s, 0.5 ms pulse.
Constant Acceleration Resistance
(Y-1 axis):
5,000 G’s.
Mechanical Characteristics
Weight (approx.):
.07 oz. (5 grams)
Materials:
Header: Kovar
Cover: Grade A Nickel
Pins: Kovar, gold plated
Electrical Specifications (-55°C to +120°C unless otherwise specified)
Input
Input current (max.)
Input voltage drop (max. @ 25mA))
Must turn-on current
Must turn-off current
Reverse voltage protection
I/O
Dielectric strength (60Hz., 1mA leakage)
Insulation resistance (min.) @ 500Vdc
Capacitance (max. @ 25Vdc, 1 Mhz)
Output
Continuous load current, parallel (DC) configuration (max.)
Continuous load current, series (bi-directional) configuration (max.)
Continuous operating load voltage (max.)
Transient blocking voltage (5 sec max.)
Overload (100ms, 10% duty cycle, 10 cycles max.)
dv/dt (min.)
On resistance (max.), parallel (DC) configuration
On resistance (max.), series (bi-directional) configuration
Thermal resistance, junction to ambient
Thermal resistance, junction to case
25mAdc
1.5 Vdc
10mA
10µA
-5.0Vdc
500V rms
109 ohms
5pF
2A
1A
+/– 80V
+/– 90V
350% of rated
100V / µs
0.4 ohm
0.6 ohm
110°C/W
20°C/W
Figure 1 – Wiring Diagrams
Series Connection
V(in)
TOP VIEW
RS
1
6
2
5
3
4
V(load)
LOAD
N/C
Parallel Connection
V(in)
TOP VIEW
RS
1
6
2
5
3
4
V(load)
LOAD
© 2004 by Tyco Electronics Corporation. All Rights Reserved.
CII and TYCO are trademarks.
Catalog MS18-TBD
Issued 1-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
1
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967