MS14-1Y Datasheet, PDF (1/2 Pages) Tyco Electronics – MS14 Series Military Solid State Relay

MS14 Series Military Solid State Relay
With Bi-Directional Output to 240mA & 400V
Product Facts
■ 1000V optical isolation
protects control and driver
circuitry from load
transients.
■ Buffered/current limited
input for direct drive from
CMOS or TTL logic.
■ Power MOSFET output chips
for low voltage drop and
virtually no offset voltage.
■ 90 & 240mA output current
options.
■ 100 & 400V output voltage
options.
■ Subminiature hermetically
sealed .100 grid package.
■ Screened per “Y” level of
MIL-PRF-28750D or CII “W”
level.
■ Direct replacement for
TELEDYNE M92F series
Environmental Characteristics
Ambient Temperature Range:
Operating: -55°C to +105°C.
Storage: -55°C to +125°C.
Vibration Resistance:
100 G’s, 10-3,000 Hz.
Shock Resistance:
1,500 G’s, 0.5 ms pulse.
Constant Acceleration Resistance:
5,000 G’s.
Mechanical Characteristics
Weight (max.):
.07 oz. (2 grams)
Materials:
Case: DIP, hermetically sealed.
Pins: Copper, gold plated
2 Terminal Input Configuration
+Vcc
5
4
3
TTL
7 _LOAD ^±VLOAD
1 _{LOAD LOAD}
RETURN
3 Terminal Input Configuration
+Vcc
5
4
TTL ₃
(–)
7 _LOAD ^±VLOAD
1 _{LOAD LOAD}
RETURN
MS14 series subminiature
SSRs employ state of the art
photo-voltaic optical isolation
providing 1000Vrms
input/output isolation and back
to back power MOSFET output
chips for ultra-reliable high
speed switching of AC, DC and
bipolar DC loads up to 240mA
at load voltages up to 400Vdc.
The input is current regulated
and buffered to minimize power
dissipation and permit driving
the relay direct from CMOS or
TTL. The relay is packaged in a
custom hermetically sealed
low-profile .100 grid package
which conserves space for high
density PC board circuitry.
CII Part No.
MS14-1Y*
MS14-2Y*
MS14-3Y*
DSCC Dwg. No.
N/A
N/A
87034-001 (qualification pending)
* Note: “W” suffix denotes screening to CII “W” level.
Output Rating
±90mA / 400V
±180mA / 200V
±240mA / 100V
Electrical Specifications (-55°C to +105°C unless otherwise specified)
Input (2 terminal configuration)
Input supply voltage range (Vcc)
3.8 - 32 Vdc (Notes 1 & 2, Figures 1 & 2)
Input current (max.) @ 5Vdc
15mAdc (Notes 1 & 2, Figures 1 & 2)
Must turn-on voltage
3.8Vdc
Must turn-off voltage
1.5Vdc
Reverse voltage protection
-32Vdc
Input (3 terminal configuration)
Control voltage range
0 - 18 Vdc
Control current (max.)
250µAdc @ 5V, 1mA @ 18V
Input supply voltage range (Vcc)
3.8 - 32 Vdc (Notes 1 & 2, Figures 1 & 2)
Input current (max.) @ 5Vdc
15mAdc (Notes 1 & 2, Figures 1 & 2)
Must turn-on voltage
0.3Vdc
Must turn-off voltage
2.8Vdc
Schmitt hysterisis (min.)
1.0Vdc
I/O
Dielectric Strength (min.)
Insulation Resistance (min.) @ 500Vdc
1,000V rms
109 ohms
Capacitance (max.)
10pF
Output
Continuous load current (max.) @ 25°C: MS14-1
±90mA (Note 5, Figure 4)
Continuous load current (max.) @ 25°C: MS14-3
±240mA (Note 5, Figure 4)
Continuous load voltage, DC max. or ACpk: MS14-1
±100V
Continuous load voltage, DC max. or ACpk: MS14-3
±400V
On resistance (max.) @ Tj = 25°C, IL = 100ma: MS14-1
On resistance (max.) @ Tj = 25°C, IL = 100ma: MS14-3
Off-state leakage current (max.) @ VL = 80% max. rated
Turn-on time (max.)
50 ohms (Note 6, Figure 5)
8 ohms (Note 6, Figure 5)
±50µAdc
1 ms (Figure 3)
Turn-off time (max.)
1 ms (Figure 3)
Junction temperature (max.)
150°C
© 2005 by Tyco Electronics Corporation. All Rights Reserved.
CII and TYCO are trademarks.
Other products and company names mentioned herein may be trademarks of their respective owners.
1
Catalog 9-1773439-2
Revised 4-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967