MLS9208-01800 Datasheet, PDF (1/2 Pages) Tyco Electronics – Surface Mount Frequency Synthesizer CDMA 1770 - 1832 MHz

Surface Mount Frequency Synthesizer
MLS9208-01800
MLS9208-01800
Surface Mount Frequency Synthesizer
CDMA 1770 - 1832 MHz
Features
• Integrated VCO/PLL
• Miniature SMT Package
• Low Phase Noise
• +5V Operation
Description
The MLS9208-01800 synthesizer design integrates a high perfor-
mance buffered VCO, PLL circuit and discrete loop filter in a
surface mount package. The SMT packaging provides electrical
shielding, easy PCB assembly and repeatable performance. The
synthesizer is designed for use in PCS CDMA base stations and is
optimised for 50 kHz step size and low phase noise and spurious
performance.
M/A-COM synthesizers are manufactured in an ISO 9001 certi-
fied facility, incorporating surface mount assembly and automated
electrical testing. This ensures consistent electrical performance
and quality over volume production quantities.
12 Lead Package
DETAIL A
12 11 10 9 8 7
M/ A- COM LTD
PART NO.
DATE CODE
12 34 5 6
IDENT
0.2
2.0
TYP.in 5 POSITIONS
13.2
0.6
0.8
1.0
DETAIL A
Electrical Specifications¹, T_A = +25°C, V_CC = +5V, ∆F = 50 kHz, F_R = 15 MHz (unless otherwise stated)
Parameter
Test Conditions
Units
Min.
Typ.
Max.
Frequency Range (F_OUT)²
RF Output Power (P_OUT)³
Harmonic Output
Over T_OP
Over T_OP
MHz
1770
—
1832
dBm
-3.0
—
+3.0
dBc
—
-16
-10
Spurious Output
Phase comparison frequency (F_out ± ∆F)
dBc
—
-77
-65
Phase Noise⁴
Reference breakthrough (F_OUT±F_R)
SSB at 100 Hz offset from carrier
dBc
—
-88
—
dBc/Hz
—
-55
—
SSB at 1 kHz offset from carrier
dBc/Hz
—
-65
-60
SSB at 10 kHz offset from carrier
dBc/Hz
—
-94
-87
Frequency Switching Time^5,6
VCO Supply Current (I_CC1)
PLL Supply Current (I_CC2)
VCO Supply Voltage (V_CC1)
PLL Supply Voltage (V_CC2)
Step Size (∆F)⁷
Reference Frequency (F_R)⁸
SSB at 100 kHz offset from carrier
Over F_out, measured to within ±500 Hz
Recommended operating limit
Recommended operating limit
Recommended operating limit
0.5 to 2.0 Vpp sine wave into a.c. coupled
CMOS. Recommended operating limit
dBc/Hz
ms
mA
mA
V
V
kHz
MHz
—
—
—
—
+4.75
+4.75
—
3
-116
31
19
10
—
—
50
—
-108
—-
23
12
+5.25
+5.25
—
20
1. All specification limits are indicated values and apply over F_OUT and
for 50Ω load impedance.
2. Programming control is 3 wire serial CMOS or TTL levels, in accor-
dance with National Semiconductor LMX 2325.
3. Output power window includes variation over operating temperature
range (T_OP) -40°C to +85°C and output frequency range (F_OUT).
4. See plot for typical phase noise at other frequency offsets.
5. See plot for typical full band switching time measured to within
other offsets from final frequency.
6. Integral PLL lock monitor output, TTL high locked, TTL low un-
locked.
7. Device designed for loop bandwidth of 300 Hz.
8. Reference frequency input impedance 10 kΩ min.
V2.00
www.macom.com
M/A-COM Division of AMP Incorporated s North America: Tel. [phone], Fax [phone] s Asia/Pacific: Tel.[phone],
Fax [phone] s Europe: Tel. [phone], Fax[phone]
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.