MINISMDC150 Datasheet, PDF (1/1 Pages) Tyco Electronics – PolySwitch®PTC Devices

Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
800-227-4856
FAX [phone]
RAYCHEM
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: miniSMDC150
DOCUMENT: SCD 24264
PCN: 439545
REV LETTER: F
REV DATE: OCTOBER 25, 2000
PAGE NO.: 1 OF 1
Specification Status: RELEASED
Maximum Electrical Rating
Voltage: 6V_DC
Short Circuit Current: 100A
D
E
C
Notes:
1. All terminations are tin/lead plated.
2. Devices can be wave soldered.
3. Drawing not to scale
Marking:
15
Manufacturer's Mark
Part Identification
Marking
D
E
TABLE I. DIMENSIONS:
A
B
C
D
E
MIN MAX MIN MAX MIN MAX MIN MIN MAX
mm: 4.37 4.73 3.07 3.41 0.28 0.48 0.25 0.20 0.50
in: (0.172) (0.186) (0.121) (0.134) (0.011) (0.019) (0.010) (0.008) (0.020)
TABLE II. PERFORMANCE RATINGS:
IHOLD ** HOLD CURRENT AT TEMPERATURE**
RATED
CURRENT
TIME TO
TRIP **
@ 8.0A
AMPERES
AT 20°C
HOLD
AMPERES
AT - 40°C
HOLD
AMPERES
AT 20°C
HOLD
AMPERES SECONDS
AT 55°C AT 20°C
HOLD
MAX
1.5
2.30
1.50
1.00
0.5
RESISTANCE
VALUES
OHMS
AT 20°C
MIN MAX*
0.040 0.110
**TRIPPED-STATE
POWER
DISSIPATION
WATTS AT
20°C
MAX
0.8
* Maximum resistance is measured 1 hour after reflow.
**Values Specified were determined using PCB’s with 0.030”X1.5 ounce copper traces.
Reference Documents:
Precedence:
Effectivity:
CAUTION:
PS300, E. N. SMD1.0x
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.