MINISMDC110 Datasheet, PDF (1/1 Pages) Tyco Electronics – PolySwitch®PTC Devices

Tyco / Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: [phone]
Fax: [phone]
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: miniSMDC110
DOCUMENT: SCD 23489
PCN: 472815
REV LETTER: H
REV DATE: JUNE 10, 2002
PAGE NO.: 1 OF 1
Specification Status:RELEASED
Maximum Electrical Rating
Voltage: 8V_DC
Short Circuit Current: 100A
Notes:
1. All terminations are tin/lead plated.
2. Devices can be wave soldered.
3. Drawing not to scale
Marking:
1
PART IDENTIFICATION
MANUFACTURER'S MARK
TABLE I. DIMENSIONS:
A
B
C
MIN MAX MIN MAX MIN MAX
mm: 4.37 4.73 0.38 0.62 3.07 3.41
in: (0.172) (0.186) (0.015) (0.025) (0.121) (0.134)
D
MIN
0.30
(0.012)
E
MIN MAX
0.25 0.50
(0.010) (0.020)
TABLE II. PERFORMANCE RATINGS:
CURRENT RATINGS **
TIME TO
TRIP **
@ 8.0A
AMPERES AMPERES AMPERES SECONDS
AT - 40°C AT 20°C AT 60°C AT 20°C
HOLD
HOLD
HOLD
MAX
1.60
1.10
0.71
0.3
RESISTANCE
VALUES
OHMS
AT 20°C
MIN
MAX*
0.04 0.21
TRIPPED-STATE
POWER
DISSIPATION **
WATTS AT
20°C MAX
1.2
* Maximum resistance is measured 1 hour after reflow
** Values Specified were determined using PCB’s with 0.030”X1.5 ounce copper traces.
Reference Documents:
Precedence:
Effectivity:
CAUTION:
PS300, E. N. SMD1.0x.
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.