MINISMDC075 Datasheet, PDF (1/1 Pages) Tyco Electronics – PolySwitch® PTC Devices

Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1064
800-227-4856
FAX [phone]
RAYCHEM
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: miniSMDC075
DOCUMENT: SCD 23259
PCN: 242001
REV LETTER: H
REV DATE: OCTOBER 24, 2000
PAGE NO.: 1 OF 1
Specification Status: RELEASED
Maximum Electrical Rating
Voltage: 13.2V_DC
Short Circuit Current: 100A
Notes:
1. All terminations are tin/lead plated.
2. Devices can be wave soldered.
3. Drawing not to scale
Marking:
7
PART IDENTIFICATION
MANUFACTURER'S MARK
TABLE I. DIMENSIONS:
A
B
MIN MAX MIN MAX
mm: 4.37 4.73 3.07 3.41
in: (0.172) (0.186) (0.121) (0.134)
C
D
E
MIN MAX MIN MIN MAX
0.38 0.62 0.30 0.25 0.50
(0.015) (0.025) (0.012) (0.010) (0.020)
TABLE II. PERFORMANCE RATINGS:
IHOLD ** HOLD CURRENT AT TEMPERATURE** TIME TO
RATED
TRIP **
CURRENT
@ 8.0A
AMPERES AMPERES AMPERES AMPERES SECONDS
AT 20°C AT - 40°C AT 20°C AT 60°C AT 20°C
HOLD
HOLD
HOLD
HOLD
MAX
0.75
0.81
0.75
0.49
0.2
RESISTANCE
VALUES
OHMS
AT 20°C
MIN
MAX*
0.11 0.45
**TRIPPED-STATE
POWER
DISSIPATION
WATTS AT
20°C
MAX
1.0
* Maximum resistance is measured 1 hour after reflow.
**Values Specified were determined using PCB’s with 0.030”X1.5 ounce copper traces.
Reference Documents:
Precedence:
Effectivity:
CAUTION:
PS300, E. N. SMD1.0x
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.