MINISMDC014 Datasheet, PDF (1/1 Pages) Tyco Electronics – PolySwitch®PTC Devices

Tyco / Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: [phone]
Fax: [phone]
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: miniSMDC014
DOCUMENT: SCD 24025
PCN: 941493
REV LETTER: L
REV DATE: SEPTEMBER 12, 2001
PAGE NO.: 1 OF 1
Specification Status: RELEASED
Maximum Electrical Rating
Voltage: 60V_DC
Current: 10A
Notes:
1. All terminations are tin/lead plated.
2. Devices can be wave soldered.
3. Drawing not to scale
Marking:
14
Manufacturer's Mark
Part Identification
TABLE I. DIMENSIONS:
A
B
MIN MAX MIN MAX
mm 4.37 4.73 0.635 0.890
:
in: (0.172) (0.186) (0.025) (0.035)
C
MIN MAX
3.07 3.41
D
MIN
0.30
(0.121) (0.134) (0.012)
E
MIN MAX
0.25 0.50
(0.010) (0.020)
TABLE II. PERFORMANCE RATINGS:
CURRENT RATINGS**
TIME TO
TRIP **
@ 1.5A
TIME TO
TRIP **
@ 8.0A
AMPERES
AT - 40°C
HOLD
AMPERES
AT 20°C
HOLD
AMPERES SECONDS SECONDS
AT 60°C AT 20°C AT 20°C
HOLD
0.23
0.140
0.090
0.150
0.008
RESISTANCE
POWER
VALUES
DISSIPATION
OHMS
AT 20°C
MIN MAX*
1.50 6.00
WATTS AT
20°C
MAX
0.75
* Maximum resistance is measured 1 hour after reflow.
**Values Specified were determined using PCB’s with 0.030”X1.5 ounce copper traces.
Reference Documents:
Precedence:
Effectivity:
CAUTION:
PS300, E. N. SMD1.0x
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.