MICROSMD110F Datasheet, PDF (1/1 Pages) Tyco Electronics – PolySwitch®PTC Devices

Tyco / Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025
Phone: [phone]
Fax: [phone]
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: microSMD110F
DOCUMENT: SCD 25059
PCN: D42327, RF0405
REV LETTER: D
REV DATE: JANUARY 12, 2006
PAGE NO.: 1 OF 1
Specification Status: Released
Maximum Electrical Rating
Voltage: 6V_DC
Current: 40A
Notes:
1. All terminations are tin plated.
2. Drawing not to scale
Marking:
TABLE I. DIMENSIONS:
A
B
C
D
E
MIN MAX MIN MAX MIN MAX MIN MAX MIN
mm: 3.00 3.43 0.28 0.48 2.35 2.80 0.25 0.75 0.20
in: (0.118) (0.135) (0.011) (0.019) (0.092) (0.110) (0.010) (0.030) (0.008)
TABLE II. PERFORMANCE RATINGS:
CURRENT RATINGS**
TIME TO
TRIP**
AMPERES AMPERES AMPERES SECONDS
AT 0°C
AT 20°C AT 60°C AT 20°C, 8A
HOLD TRIP HOLD TRIP HOLD TRIP MAX
1.26 2.52 1.10 2.20 0.80 1.60
0.2
RESISTANCE TRIPPED-STATE
VALUES
POWER
DISSIPATION**
OHMS
AT 20°C
MIN MAX*
WATTS AT
20°C, 6V
MAX
0.07 0.21
0.8
*Maximum resistance is measured 1 hour after reflow.
** Values specified were determined using PCB’s with 0.030”X1.5 ounce copper traces.
Agency Recognition: UL, CSA, TÜV
Reference Documents: PS300, E. N. SMD1.0x
Precedence:
This specification takes precedence over documents referenced herein.
Effectivity:
Reference documents shall be the issue in effect on the date of invitation for bid.
CAUTION:
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ROHS Compliant
ELV Compliant
Pb-Free
© 2006 Tyco Electronics Corporation. All rights reserved.