MICROSMD005 Datasheet, PDF (1/1 Pages) Tyco Electronics – PolySwitch PTC Devices Overcurrent Protection Devi

Tyco / Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025
Phone: [phone]
Fax: [phone]
PolySwitch®
PTC Devices
Overcurrent Protection Devi
PRODUCT: microSMD005
DOCUMENT: SCD 24366
PCN: 092391
REV LETTER: D
REV DATE: NOVEMBER 19, 2001
PAGE NO.: 1 OF 1
Specification Status: Released
Maximum Electrical Rating
Voltage: 30V_DC
Current: 10A
Notes:
1. All terminations are tin/lead plated.
2. Devices can be wave soldered.
3. Drawing not to scale
Marking:
TABLE I. DIMENSIONS:
A
B
MIN MAX MIN MAX
mm: 3.00 3.43 0.50 0.85
in:* (0.118) (0.135) (0.019 (0.034)
C
MIN MAX
2.35 2.80
(0.092) (0.111)
D
MIN
0.25
(0.010)
E
MIN
0.20
(0.008)
*Rounded off approximation
TABLE II. PERFORMANCE RATINGS:
CURRENT RATINGS**
TIME TO
TRIP **
AMPERES AMPERES AMPERES SECONDS
AT 0°C
AT 20°C
AT 60°C AT 20°C, 0.25A
HOLD TRIP HOLD TRIP HOLD TRIP
MAX
0.060 0.180 0.050 0.150 0.030 0.090
1.5
RESISTANCE TRIPPED-STATE
VALUES
POWER
DISSIPATION**
OHMS
WATTS AT
AT 20°C
20°C, 30V
MIN MAX*
MAX
3.6 50.0
1.0
*Maximum resistance is measured 1 hour after reflow.
** Values specified were determined using PCB’s with 0.030”X1.5 ounce copper traces.
Reference Documents:
Precedence:
Effectivity:
CAUTION:
PS300, E. N. SMD1.0x
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.