English
Language : 

MASY-008215-243000 Datasheet, PDF (1/3 Pages) Tyco Electronics – Synthesiser, SMT, 3.15 - 5.55 GHz, 2.5 MHz step.
Synthesiser, SMT, 3.15 - 5.55 GHz, 2.5 MHz step.
MASY-008215-243000
V2
Features
• Full Integration: VCO, PLL, Loop Filter
• Wide Bandwidth (> 2GHz)
• Fast Switching (=< 50µs)
• Low noise: Typ -110 dBc/Hz @ 100kHz offset
Description
This synthesiser is designed for demanding wide
bandwidth applications.
The fully integrated design incorporates a VCO, PLL
and loop filter in a convenient surface mount pack-
age. The lid is fully solder attached to provide opti-
mum electrical shielding.
Programming is via 3 Wire SPI (Serial Peripheral
Interface.)
Actual product finish may vary from illustration
Electrical Specification
(Applies over the frequency range @ +25 °C, output and input load impedance of 50 ohms. Unless otherwise
stated limits & conditions are indicated values.)
Parameter
Min
Typ
Max
Units
Condition
Frequency
3.15
4.35
5.55
GHz
Over TOP - See Note 1.
Step Size
2.5
MHz
RF Output power
0
+3
+6
dBm
Output Return Loss
Settling Time
12
dB
50
µs
To within ± 10kHz
Output Harmonic
Spurious
-20
-15
dBc
-63
-60
dBc
Phase Noise
(Noise <1kHz offset dependent upon
external reference)
External Ref
-90
-85
-110
100
-75
-75
-100
dBc/Hz
dBc/Hz
dBc/Hz
MHz
Offset 1kHz
Offset 10kHz
Offset 100kHz
See Note 2.
Lock Monitor
2.0
2.5
3.3
Volt
Out of Lock
0
0.1
0.8
Volt
In Lock
VPLL DC Supply voltage
VPLL DC Current
VVCO DC Supply voltage
VVCO DC Current
+23.75
+24
+24.25 Volt
10
15
mA
+9.75
+10
+10.25 Volt
100
150
mA
Vcc = +24V
Vcc = +10 V
Note 1: TOP = -40°C ~ +85°C Case operating temperature
Note 2: External Reference, 0dBm min input power, with stability of 20 ppm (max) over temperature.
Reference phase noise: -98 dBc/Hz @ 10 Hz, -110 dBc/Hz @ 100 Hz, -120 dBc/Hz @ 1 kHz
Note 3: Programming 3 Wire SPI (Serial Peripheral Interface) - contact factory for details.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.