MASWSS0157 Datasheet, PDF (1/3 Pages) Tyco Electronics – GaAs SPDT Switch DC - 2.5 GHz

GaAs SPDT Switch
DC - 2.5 GHz
Features
• Very Low DC Power Consumption: 100 µW
• Low Insertion Loss: 0.5 dB
• High Isolation: 25 dB up to 2 GHz
• Very High Intercept Point: 45 dBm IP₃
• Nanosecond Switching Speed
• Lead-Free SOIC-8 Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of the SW-239
Description
M/A-COM’s MASWSS0157 is a GaAs MMIC SPDT
switch in a lead-free SOIC 8-lead surface mount
plastic package. The MASWSS0157 is ideally suited
for use where low power consumption is required.
Typical applications include transmit/receive
switching, switch matrices and switched filter banks
in systems such as radio and cellular equipment,
PCM, GPS, fiber optic modules, and other battery
powered radio equipment.
The MASWSS0157 is fabricated using a monolithic
GaAs MMIC using a mature 1 micron process. The
process features full chip passivation for increased
performance and reliability.
Ordering Information
Part Number
MASWSS0157
MASWSS0157TR
MASWSS0157TR-3000
MASWSS0157SMB
Package
Bulk Packaging
1000 piece reel
3000 piece reel
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
RoHS
Compliant
MASWSS0157
V3
Functional Schematic
Pin 8
GND
GND
RF2
B
RFC
GND
RF1
A
Pin 1
Pin Configuration
Pin No.
1
2
3
4
Function
RF Common
Ground
RF Port 1
Control A
Pin No.
5
6
7
8
Function
Control B
RF Port 2
Ground
Ground
Absolute Maximum Ratings ^1,2
Parameter
Absolute Maximum
Input Power
0.05 GHz
0.5 - 2.0 GHz
+27 dBm
+34 dBm
Control Voltage
-8.5 V < Vc < +5 V
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.