MASWSS0118 Datasheet, PDF (1/3 Pages) Tyco Electronics – GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz

GaAs SP4T 2.5 V High Power Switch
DC - 3.0 GHz
Features
• Low Voltage Operation: 2.5 V
• Low Harmonics: < -65 dBc at +34 dBm & 1 GHz
• Low Insertion Loss: 0.65 dB at 1 GHz
• High Isolation: 23 dB at 2 GHz
• 4 mm 16-Lead PQFN Package
• 0.5 micron GaAs PHEMT Process
Description
M/A-COM’s MASWSS0118 is a GaAs PHEMT
MMIC single pole four throw (SP4T) high power
switch in a low cost 4 mm 16-lead PQFN package.
The MASWSS0118 is ideally suited for applications
where high power, low control voltage, low insertion
loss, high isolation, small size, and low cost are
required.
Typical applications are for GSM and DCS handset
systems that connect separate transmit and receive
functions to a common antenna, as well as other
handset and related applications. This part can be
used in all systems operating up to 3.0 GHz
requiring high power at low control voltage.
The MASWSS0118 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Ordering Information
Part Number
MASWSS0118TR
MASWSS0118TR-3000
MASWSS0118SMB
Package
1000 piece reel
3000 piece reel
Sample Test Board
1. Reference Application Note M513 for reel size information.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Functional Schematic
MASWSS0118
V2
Pin 16
Pin 1
V1
RF1
39 pF
GND
RF2
39 pF
RF4
39 pF
GND
GND
RF3
39 pF
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Pin Name
V1
RF1
GND
RF2
GND
V2
V3
GND
RF3
GND
GND
RF4
GND
V4
GND
ANT
Paddle ²
Description
Control 1
RF Port 1
RF Ground
RF Port 2
RF Ground
Control 2
Control 3
RF Ground
RF Port 3
RF Ground
RF Ground
RF Port 4
RF Ground
Control 4
RF Ground
Antenna Port
RF Ground
2. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.