MASWSS0091 Datasheet, PDF (1/4 Pages) Tyco Electronics – GaAs SP6T 2.5 V High Power Switch Dual / Tri / Quad-Band GSM Applications

GaAs SP6T 2.5 V High Power Switch
Dual / Tri / Quad-Band GSM Applications
Features
• Supplied as Known Good Die
• Dual/tri/quad-band GSM/GPRS/EDGE
• Low Voltage: 2.5V Operation
• Low Harmonics: -72 dBc at +35 dBm & 1 GHz
• Low Insertion Loss: 0.5 dB at 1 GHz
• High Tx-Rx Isolation: 38 dB at 2 GHz
Description
M/A-COM’s MASWSS0091 is a GaAs PHEMT
MMIC single pole six throw (SP6T) high power
switch die. The MASWSS0091 is ideally suited for
applications where high power, low control voltage,
low insertion loss, high isolation, small size and low
cost are required. The MASWSS0091 is designed
for dual-, tri-, and quad-band GSM and DCS/PCS
handset systems that connect separate transmit and
receive functions to a common antenna, and can be
used in all systems operating up to 2.5 GHz
requiring high power at low control voltage.
The MASWSS0091 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Ordering Information
Part Number
MASWSS0091SMB
MASWSS0091-DIE
Package
Sample Test Board
Separated die on Grip Ring
Note: Die quantity varies.
Absolute Maximum Ratings ¹
Parameter
Input Power
(0.5 - 2.5 GHz, 2.5V Control)
Voltage
Operating Temperature
Storage Temperature
Absolute Maximum
+38 dBm
±8.5 volts
-40°C to +85°C
-65°C to +150°C
1. Exceeding any one or combination of these limits may
cause permanent damage to the device.
Die Layout
Tx1
VTx1
MASWSS0091
V6
ANT
VTx2
Tx2
ANT
VRx1 Rx1 GND Rx2 VRx2 VRxC VRx3 Rx3 GND Rx4 VRx4
Pad Layout
PAD Name
Tx1
VTx1
ANT
VTx2
Tx2
VRx4
Rx4
GND
Rx3
VRx3
VRxC
VRx2
Rx2
GND
Rx1
VRx1
ANT
Description
Tx1 Port
Tx1 Control
Antenna Port
Tx2 Control
Tx2 Port
Rx4 Control
Rx4 Port
Ground
Rx3 Port
Rx3 Control
Rx Common Control
Rx2 Control
Rx2 Port
Ground
Rx1 Port
Rx1 Control
Redundant ANT Pad
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.