MASWSS0067 Datasheet, PDF (1/4 Pages) Tyco Electronics – SPST High Isolation CATV Switch 5 - 1000 MHz

SPST High Isolation CATV Switch
5 - 1000 MHz
V1
MASWSS0067
Features
• 75 Ohm Impedance
• Positive Voltage Control (0 / +5 V)
• Input Terminated (Off State)
• Low Insertion Loss: 0.62 dB at 870 MHz
• High Isolation: 54 dB at 870 MHz
• 3 mm FQFP-N 12 Lead Package
• 0.5 micron GaAs PHEMT Process
Functional Schematic
GT1 N/C N/C
GND
GND
Description
M/A-COM’s MASWSS0067 is a GaAs PHEMT
MMIC single pole single throw (SPST) switch in a
low cost 3 mm FQFP-N 12 lead package. The
MASWSS0067 is ideally suited for applications
where low control voltage, low insertion loss, high
isolation, small size and low cost are required.
Typical applications are to replace mechanical
relays in CATV systems. This part can be used in
all 75 ohm systems operating up to 1.0 GHz.
The MASWSS0067 is fabricated using a 0.5
micron gate length GaAs PHEMT process. The
process features full passivation for performance
and reliability.
Ordering Information ¹
Part Number
MASWSS0067
Package
FQFP- N 12-lead Plastic Package
MASWSS0067TR
7 inch, 1000 piece reel
MASWSS0067TR-3000 13 inch, 3000 piece reel
MASWSS0067SMB
Sample Test Board (Includes 5 Samples)
1. Reference Application Note M513 for reel size
information.
RF1
RF2
G1
GND
V1 N/C V2
Pin Configuration ²
PIN
PIN Name
No.
1
GND
2
RF1
3
G1
4
V1
5
N/C
6
V2
7
GND
8
RF2
9
GND
10
N/C
11
N/C
12
GT1
Description
Ground
RF In
RF Ground
Control 1
No Connection
Control 2
Ground
RF Out
Ground
No Connection
No Connection
RF Ground
2. The exposed pad centered on the package bottom
must be connected to both RF and DC ground.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
n North America: Tel. [phone]
1
n Asia/Pacific: Tel. [phone], Fax [phone]
n Europe: Tel. [phone], Fax [phone]