MASWML028 Datasheet, PDF (1/1 Pages) Tyco Electronics – SP6T Reflective Switch with TTL Compatible Driver, 0.85 to 18.0 GHz

SP6T Reflective Switch with TTL
Compatible Driver, 0.85 to 18.0 GHz
Features
n Broad Band Frequency
n SMA Connectors
n Hermetically Sealed Housing
n High Isolation
n TTL Compatible
Other Mechanical
SMA Female connectors for RF ports and Solder pins for
TTL & DC connections. This device is painted with black
epoxy finish.
Description
This SP6T reflective switch offers high Isolation & Low
Insertion. The switch has an integral TTL compatible
driver. It also consists of 3 Bits parallel TTL controls (3
control pins). This switch is supplied with SMA
connectors. It is a proven design for ESM application. It is
also suitable for Airborne, Naval & Ground base
applications.
V 1.00
Electrical Performance
(Applies over the frequency range @ +25 °C, output load impedance of 50 ohms. Unless otherwise stated limits & conditions
are indicated values.)
Type Frequency I/Loss
(GHz)
max
(dB)
Isolation
min
(dB)
R/Loss
min
(dB)
S.
Speed
max
(ns)
I/P
Power
max
(mw)
Logic
Power
Supply
V & mA
Dimensions
(Ex-Con)
mm
Oper-
ating
Temp
°C
Storage
Temp
°C
SP6T 0.85 - 18.0 4.0
55
9.5
900
100 3 Bits parallel TTL +5 -5.2 38.1x38.1x19.1 0 to -40 to
190 50
+100 +100
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
n North America: Tel. [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax[phone]