MASWML017 Datasheet, PDF (1/1 Pages) Tyco Electronics – SPDT Reflective Switch 10.5 to 13.5 GHz

SPDT Reflective Switch
10.5 to 13.5 GHz
V 1.00
Features
n SMA Connectors
n High Input RF Power
n Internal DC Bias Circuitry
n Hermetically Sealed Housing
n High Isolation
n Fast Switching
Other Mechanical
SMA Female connectors for RF ports and Solder pins for bias
& DC connections. This device is painted with black epoxy
finish.
Description
This SPDT reflective switch offers a 3 W cw RF input power
handling capability. It has two independent DC bias control to
drive both channels. The switch provide fast switching and
high Isolation. It is a proven design for harsh environments
and is suitable for Airborne, Naval & Ground base
applications.
Electrical Performance
(Applies over the frequency range @ +25 °C, output load impedance of 50 ohms. Unless otherwise stated limits & conditions
are indicated values.)
Type Frequency I/Loss
(GHz)
max
(dB)
Isolation
min
(dB)
R/Loss
min
(dB)
S.
Speed
max
(ns)
I/P
Power
max
(mw)
Logic
Power
Supply
V & mA
Dimensions
(Ex-Con)
mm
Oper-
ating
Temp
°C
Storage
Temp
°C
SPDT 10.5 - 13.5 1.7
65
11.7
30
3W
-5 to -15V for -5
1 50x20x9.8 -55 to -55 to
(CW) L .Loss & R. Loss to 15
+110 +125
+1V (50mA max) _{0.5 50}
for Isolation
(DC Bias only)
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
n North America: Tel. [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax[phone]