MASWML013 Datasheet, PDF (1/1 Pages) Tyco Electronics – SPDT Reflective Switch with TTL Compatible Driver, 6.4 to 18.0 GHz

SPDT Reflective Switch with TTL Compatible
Driver, 6.4 to 18.0 GHz
V 1.00
Features
n Broad Band Frequency
n SMA Connectors
n Hermetically Sealed Housing
n Higher Input RF Power
n TTL Compatible
n Single TTL Control
Description
This SPDT reflective switch offers a 2 W cw RF input power
handling capability. It has a single TTL control to drive both
channels. This switch has an integral TTL compatible driver.
It is a proven design for harsh environments and is suitable
for Airborne, Naval & Ground base applications.
Other Mechanical
SMA Female connectors for RF ports and Solder pins for
TTL & DC connections. This device is painted with black
epoxy finish.
Electrical Performance
(Applies over the frequency range @ +25 °C, output load impedance of 50 ohms. Unless otherwise stated limits & conditions
are indicated values.)
Type Frequency I/Loss
(GHz)
max
(dB)
Isolation
min
(dB)
R/Loss
min
(dB)
S.
Speed
max
I/P
Power
max
(mw)
Logic
Power
Supply
V & mA
Dimensions
(Ex-Con)
mm
Oper-
ating
Temp
°C
Storage
Temp
°C
SPDT 6.4 - 18.0 3.85
52
7.4
10
2w ‘0’:I/P - Port B Low +5 -15 40.7x40.7x12.9 -40 to -55 to
micro (CW)
second
Loss
TTL
250 50
+85 +125
‘1’:I/P - Port A Low
Loss
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
n North America: Tel. [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax[phone]