MASW-008153 Datasheet, PDF (1/4 Pages) Tyco Electronics – SPDT High Isolation CATV Switch 5 - 1000 MHz

MASW-008153
SPDT High Isolation CATV Switch
5 – 1000 MHz
Features
• 75 Ω Impedance
• Input Terminated
• Positive Voltage Control
• High Isolation: 65 dB at 870 MHz
• 0.5 micron GaAs PHEMT Process
• Lead-Free 4 mm 20-Lead PQFN Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• RoHS* Compliant and 260°C Reflow Compatible
M/A-COM Products
Rev. V1
Functional Schematic
Description
M/A-COM’s MASW-008153 is a GaAs PHEMT
MMIC single pole double throw (SPDT) switch in a
lead-free 4 mm 20-lead PQFN package. The
MASW-008153 is ideally suited for applications
where low control voltage, high isolation, small size
and low cost are required.
Typical applications are to replace mechanical
relays in CATV systems. This part can be used in
all 75 Ω systems operating up to 1 GHz.
The MASW-008153 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Ordering Information ^1,2
Part Number
Package
MASW-008153-TR3000 13 inch, 3000 piece reel
MASW-008153-001SMB
Sample Board
50 - 1000 MHz tuning
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
Pin Configuration ³
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Pin Name
GND
GND
RF1
GND
GT1
GI1
GND
RFC
GND
GI2
GT2
GND
RF2
GND
GND
G2
V1
V2
V1
G1
Description
Ground
Ground
RF Port 1
Ground
RF Ground
RF Ground
Ground
RF Common Port
Ground
RF Ground
RF Ground
Ground
RF Port 2
Ground
Ground
RF Ground
Control 1
Control 2
Control 1
RF Ground
3. The exposed pad centered on the package bottom must be connected
to RF and DC ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: [phone] / Fax: [phone]
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
volume is not guaranteed.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
information contained herein without notice.