MASW-005100 Datasheet, PDF (1/7 Pages) Tyco Electronics – Monolithic PIN SP5T Diode Switch

Monolithic PIN SP5T Diode Switch
FEATURES
• Ultra Broad Bandwidth: 50MHz to 26GHz
• 1.0 dB Insertion Loss
• 30 dB Isolation at 20GHz
• Reliable.
• Fully Monolithic
• Glass Encapsulated Construction
DESCRIPTION
The MASW-005100-1194 is a SP5T Series-Shunt
broad band switch made with M/A-COM’s HMIC^TM
(Heterolithic Microwave Integrated Circuit) process,
US Patent 5,268,310. This process allows the
incorporation of silicon pedestals that form series and
shunt diodes or vias by imbedding them in a low loss,
low dispersion glass. This hybrid combination of
Silicon and Glass gives HMIC Switches exceptional
low loss and remarkable high isolation through low
millimeter-wave frequencies.
APPLICATIONS
These high performance switches are suitable for the
use in multi-band ECM, Radar, and instrumentation
control circuits where high isolation to insertion loss
ratios are required. With a standard +5 V/-5 V, TTL
controlled PIN diode driver, 50ns switching speeds are
achieved.
ABSOLUTE MAXIMUM RATINGS
T_AMB = +25°C ( Unless otherwise specified )
PARAMETER
OPERATING TEMPERATURE
STORAGE TEMPERATURE
RF C.W. INCIDENT POWER
(± 20 mA )
BIAS CURRENT
( FORWARD )
APPLIED VOLTAGE
( REVERSE )
VALUE
- 65°C to +150°C
- 65°C to +175°C
+33dBm
± 20mA
- 25V
Note:
Exceeding any of these values may result in permanent
damage.
Maximum operating conditions for combination of
RF power, D.C. bias and temperature: +30dBm C.W.,
15mA per diode @+85°C
MASW-005100-1194
Rev 1
1