|
MASW-004100 Datasheet, PDF (1/6 Pages) Tyco Electronics – Monolithic PIN SP4T Diode Switch | |||
|
Monolithic PIN SP4T Diode Switch
MASW-004100-1193
Rev. 2
Features
⢠Ultra Broad Bandwidth: 50MHz to 26GHz
⢠0.9 Insertion Loss , 34dB Isolation at 20GHz
⢠50nS Switching Speed
⢠Reliable, Fully Monolithic, Glass Encapsulated
Construction
Description
The MASW-004100-1193 is a SP4T series-shunt
broad band switch made with M/A-COMâs unique
HMICTM (Heterolithic Microwave Integrated Circuit)
process, US Patent 5,268,310. This process allows the
incorporation of silicon pedestals that form series and
shunt diodes or vias by imbedding them in a low loss,
low dispersion glass. This hybrid combination of silicon
and glass gives HMIC switches exceptional low loss
and remarkable high isolation through low millimeter-
wave frequencies.
Applications
These high performance switches are suitable for use
in multi-band ECM, radar, and instrumentation control
circuits where high isolation to insertion loss ratios are
required. With a standard +5V/-5V, TTL controlled PIN
diode driver, 50nS switching speeds are achieved.
Absolute Maximum Ratings
TAMB = +25°C ( Unless Otherwise Specified )
J2
Parameter
Value
Operating Temperature
-65°C to +125°C
Storage Temperature
-65°C to +150°C
RF C.W. Incident Power (± 20mA)
+33dBm
Bias Current ( Forward )
± 20mA
Applied Voltage ( Reverse )
-25 Volts
Notes:
Exceeding these limits may cause permanent
damage.
J3 J4
J5
J1
1
|
▷ |