MAPDCT0032 Datasheet, PDF (1/3 Pages) Tyco Electronics – 3 Way 0 Degree Power Divider 5 to 1200 MHz

MAPDCT0032
3 Way 0 Degree Power Divider
5 to 1200 MHz
Features
• Surface mount
• 3 Way 0 Degree
• RoHS Compliant and is 260ºC reflow compatible
• RoHS version of MAPDCT0005 & MAPDCT0017
• Available on tape and reel, reel quantity 500
Description
M/A-COM’s MAPDCT0032 is a 3 way 0 degree
Power Divider in a low cost, surface mount package.
Ideally suited for high volume CATV/Broadband
applications. No external components are required
with this product.
Schematic
M/A-COM Products
Part Status: Released, Rev. V2
Case Style SM-4
Pin Configuration
Function
1
2,3,6,7
4
5
8
Pin Number
Output 1
Ground
Output 2
Output 3
Input
Ordering Information
Part Number
MAPDCT0032
MAPD-008112-CT32TB
Package
500 piece reel
Customer Test Board
∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified.
Absolute Maximum Ratings ^1,2
Parameter
Absolute Maximum
RF Power
DC Current
Operating Temperature
Storage Temperature
250 mW
30 mA
-40°C to +85°C
-40°C to +85°C
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information
contained herein without notice. M/A-COM makes no warranty, representation or guarantee
regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any
liability whatsoever arising out of the use or application of any product(s) or information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for development. Performance is based on target specifications, simulated results, and/or
prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical
outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
RELEASED: In full production, samples readily available, standard lead times apply.