MAPDCT0030 Datasheet, PDF (1/3 Pages) Tyco Electronics – 2 Way 0º Power Divider 5 to 1000 MHz

MAPDCT0030
2 Way 0º Power Divider
5 to 1000 MHz
Features
• Surface mount
• 2 Way 0 degree.
• 260°C reflow compatible
• RoHS* compliant
• Available on tape and reel.
Description
M/A Com’s MAPDCT0030 is a 2 way 0 degree RF
power divider in a low cost, surface mount package.
Ideally suited for high volume CATV & VSAT appli-
cations. Two 0603 1pF capacitors and one 200Ω
resistor are required with this part.
M/A-COM Products
Released, Rev. V2
Schematic with off-chip components
Case style: SM-150
Pin configuration
Pin no.
1
2
3
4
5
6
Function
Output 1
External 1pF Capacitor to ground
Ground
Input
External 1pF Capacitor to ground
Output 2
Ordering information
Unless otherwise stated dimensions are in inches [mm]
Tolerance: .xx ± .02, .xxx ± .010
Note: Pin’s 2 and 5 need to be connected together on the PCB
as shown above.
Part number
Description
MAPDCT0030TR
Reel quantity 1000
MAPD-007985-CT30TB Customer Test Board
* Restrictions on Hazardous Substances, European Union
Directive 2002/95/EC.
Note: Reference Application Note M513 for reel size information.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: [phone] / Fax: [phone]
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
volume is not guaranteed.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product's or infor-
mation contained herein without notice.