MAPD-007249-ESML21 Datasheet, PDF (1/2 Pages) Tyco Electronics – E-Series 2-Way 0Power Divider 5 - 500 MHz

E-Series 2-Way 0° Power Divider
5 – 500 MHz
Features
• Surface mount
• Wide frequency range
• 2-Way—0°
• Lead Free
• RoHS* Compliant and is 260⁰C reflow compatible.
• Available on Tape and Reel.
Description
M/A-COM’s MAPD-007249-ESML21 is a RoHS com-
pliant 2 Way 0° Power Divider in a low cost, surface
mount package. Ideally suited for high volume cellular
and wireless applications. Parts are packaged in tape
& reel.
RoHS
Compliant
MAPD-007249-ESML21
V1P
SM-24 package
Pin Configuration
Pin No.
1
2
3
4
5
6
Function
Ground
Not Connected
Port 2
Port 1
Not Connected
Input
Ordering Information
Part Number
MAPD-007249-ESML21
Package
500 piece reel
Note: Reference Application Note M513 for reel size information.
Absolute Maximum Ratings ^1,2
Parameter
Maximum Power Rating
Internal Load Dissipation
Pin Temperature (10 Sec)
Absolute Maximum
1 Watt
0.125 Watt
250°C
Operating Temperature
Storage Temperature
-40°C to +85°C
-55°C to +125°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based
on measured results and target specifications. Commitment to produce in volume is not guaranteed.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.