MAMXSS0013 Datasheet, PDF (1/4 Pages) Tyco Electronics – Low Cost MMIC Mixer 1400 - 2100 MHz

Low Cost MMIC Mixer
1400 - 2100 MHz
Features
• +12 dBm Input Power @ 1 dB Compression
• High Isolation, 28 dB LO to RF
• +3 to +8 dBm LO Drive Level
• DC - 500 MHz 3 dB IF Bandwidth
• Does not require DC bias
• Lead-Free SOT-25 Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of MD54-0006
Description
M/A-COM’s MAMXSS0013 is a passive mixer that
achieves the performance of a double balanced
diode mixer in a lead-free SOT-25 package. The
MAMXSS0013 is ideally suited for use where high
level RF signals and very wide dynamic range are
required. Typical applications include frequency up/
down conversion, modulation and demodulation in
receivers and transmitters for base station and
portable systems.
The MAMXSS0013 uses FETs as mixing elements
to achieve very wide dynamic range in a low cost
plastic package. The mixer operates with LO drive
levels of +3 dBm to +8 dBm. The LO port may be
externally tuned for operation in various frequency
bands.
M/A-COM’s MAMXSS0013 is fabricated using a
mature 0.5 micron gate length GaAs MESFET
process. The process features full passivation for
increased performance and reliability. The
MAMXSS0013 is 100% RF tested to ensure
performance specification compliance.
Ordering Information¹
Part Number
MAMXSS0013
MAMXSS0013TR-3000
MAMX-000013-001SMB
MAMX-000013-002SMB
MAMX-000013-003SMB
Package
Bulk Packaging
3000 piece reel
1500 MHz Configuration
1710 MHz Configuration
2300 MHz Configuration
1. Reference Application Note M513 for reel size information.
RoHS
Compliant
MAMXSS0013
V2
Functional Block Diagram
RF
4
3
IF
5
2
1
R1
L1
LO
C1
Pin Configuration
Pin No.
1
2
3
4
5
Pin Name
LO Port
Ground
Ground
RF Port
IF Port
Description
LO Input
Ground
Ground
RF Input
IF Output
External Circuitry Parts List ^2,3
LO Frequency
Part
1500 MHz 1710 MHz 2300 MHz
R1
470 Ω
470 Ω
820 Ω
L1
6.8 nH
4.7 nH
2.7 nH
C1
3.3 pF
2.2 pF
2.2 pF
2. The external LO matching network allows tuning from 1400
MHz to 2300 MHz. The networks given above are
intended to serve as guidelines for matching in different bands.
3. All off-chip components are low-cost surface mount
components obtainable from multiple sources (0.060 in. x
0.030 in. or 0.080 in. x 0.050 in).
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
• North America Tel: [phone] / Fax: [phone]
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
whatsoever arising out of the use or application of any product(s) or
information.
Visit www.macom.com for additional data sheets and product information.