MADS-001317-1500 Datasheet, PDF (1/6 Pages) Tyco Electronics – Solderable GaAs Flip Chip Schottky Diode

MADS-001317-1500
Solderable GaAs Flip Chip Schottky Diode
Rev. V3
Features
• Usable Past 80GHz
• Low Series Resistance
• Low Capacitance
• High Cutoff Frequency
• Silicon Nitride Passivation
• Polyimide Scratch Protection
• Lead Free (RoHS Compliant)
• Designed for Easy Circuit Insertion
• Available in Pocket Tape and Reel
• Can be Mounted with Solder or Conductive
Epoxy
Description and Applications
M/A-COM's MADS-001317-1500 single is a gal-
lium arsenide flip chip Schottky barrier diode.
This device is fabricated on OMCVD epitaxial
material using a process designed for high de-
vice uniformity and extremely low parasitics.
This diode is fully passivated with silicon nitride
and has an additional layer of polyimide for
scratch protection. The protective coating pre-
vents damage to the junction during automated
or manual handling. The flip chip configuration
is suitable for pick and place insertion. This de-
vice with can be attached with solder or conduc-
tive epoxy. The high cutoff frequency of this
diode allows use through millimeter wave fre-
quencies. Typical applications include single
and double balanced mixers in PCN transceiv-
ers and radios, police radar detectors, and auto-
motive radar detectors.
.
MADS-001317– 1500
Ordering Information
Part Number
MADS-001317-1500AG
MADS-001317-1500AP
Package
Gel Pack
Pocket Tape and Reel
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions ^{• North America Tel: [phone] • Europe Tel: [phone]}
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: [phone]
• China Tel: [phone]
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. ^{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes}
Commitment to produce in volume is not guaranteed.
to the product(s) or information contained herein without notice.