MACPES0045 Datasheet, PDF (1/4 Pages) Tyco Electronics – 2 Way 0º Power Divider 40-1000MHz

2 Way 0º Power Divider
40-1000MHz
Features
• Surface Mount
• 2 Way 0 degree
• Available on tape & reel
• Excellent isolation
Description
M/A-COM’s MACPES0045 is 2 way 0 degree power
divider in a low cost, surface mount package. Ideally
suited for high volume CATV & VSAT applications.
Two 0603 1pf capacitors and one 160 Ohm resistor
are required with this part.
Schematic
MACPES0045
V2
Case Style: SM-150
Pin Configuration
Pin No.
1
3
4
2&5
6
Function
Output 1
Ground
Input
2 x External shunt 1pf
Cap, short pin 2 & 5 together.
Output 2
Ordering Information
Part Number
MACPES0045
Package
2000 piece reel
Dimensions in inches [mm] Tolerance: .xx ± .02, .xxx ± .010
Note: Reference Application Note M513 for reel size information.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.