M6E-50 Datasheet, PDF (1/3 Pages) Tyco Electronics – Double-Balanced Mixer

Double-Balanced Mixer
Features
• LO 5 TO 500 MHz
• RF 5 TO 500 MHz
• IF DC TO 500 MHz
• LO DRIVE +7 dBm (nominal)
• HIGH ISOLATION 40 dB (TYP.)
Description
The M6E-50 is a double balanced mixer, designed for use in
military, commercial and test equipment applications. The design
utilizes Schottky ring quad diodes and broadband ferrite baluns to
attain excellent performance. This mixer can also be used as a
phase detector and/or bi-phase modulator since the IF port is DC
coupled to the diodes. Environmental screening available to
MIL-STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory.
Product Image
M6E-50
V2
Ordering Information
Part Number
M6E-50
Package
Relay Header
Electrical Specifications: Z₀ = 50Ω Lo = +7 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -54º to +85ºC
SSB Conversion Loss
(max) & SSB Noise
Figure (max)
fR = 10 to 100 MHz , fL = 10 to 100 MHz, fI = 10 to 100 MHz
fR = 100 to 200 MHz , fL = 100 to 200 MHz, fI = 10 to 200 MHz
fR = 5 to 500 MHz, fL = 5 to 500 MHz, fI = 0.5 to 500 MHz
dB
dB
dB
6.5
7.5
8.5
7.0
8.0
9.0
7.5
8.5
9.0
Isolation, L to R (min)
Isolation, L to I (min)
1 dB Conversion Comp.
Input IP3
fL = 5 to 50 MHz
fL = 50 to 500 MHz
fL = 5 to 50 MHz
fL = 50 to 500 MHz
dB
50
40
38
dB
35
30
28
dB
45
35
33
dB
30
25
23
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.