M6D-50_1 Datasheet, PDF (1/3 Pages) Tyco Electronics – Double-Balanced Mixer

Double-Balanced Mixer
Features
• LO 0.05 TO 200 MHz
• RF 0.05 TO 200 MHz
• IF 0 TO 200 MHz
• LO DRIVE: +7 dBm (NOMINAL)
• HIGH ISOLATION: 45 dB (TYP.)
Description
The M6D-50 is a double balanced mixer, designed for use in
military, commercial and test equipment applications. The design
utilizes Schottky ring quad diodes and broadband ferrite baluns to
attain excellent performance. This mixer can also be used as a
phase detector and/or bi-phase modulator since the IF port is DC
coupled to the diodes. Environmental screening available to
MIL-STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory.
Product Image
M6D-50
V3
Ordering Information
Part Number
M6D-50
Package
Relay Header
Electrical Specifications: Z₀ = 50Ω Lo = +7 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -54º to +85ºC
SSB Conversion Loss fR=0.0002 to 0.05 GHz , fL=0.0002 to 0.05 GHz, fI=0 to 0.05 GHz dB
5.5
6.5
7.0
(max) & SSB Noise
fR = 0.05 to 0.2 GHz , fL = 0.05 to 0.2 GHz, fI = 0.05 to 0.2 GHz dB
7.5
8.0
8.5
Figure (max)
fR = 0.00005 to 0.0002 GHz, fL = 0.00005 to 0.0002 GHz,
fI = 0.00005 to 0.0002
dB
8.0
8.5
9.0
Isolation, L to R (min)
Isolation, L to I (min)
fL = 0.00005 to 0.03 GHz
fL = 0.03 to 0.2 GHz
fL = 0.00005 to 0.03 GHz
fL = 0.03 to 0.2 GHz
dB
55
40
38
dB
45
35
33
dB
50
35
33
dB
35
30
28
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.