English
Language : 

M223 Datasheet, PDF (1/2 Pages) Tyco Electronics – Surface Mount Double-Balance Mixer, 10 KHz - 500 MHz
Surface Mount Double-Balanced Mixer,
10 - 500 MHz
Features
• Fully Hermetic Package
• Low Cost
• Conversion Loss: 7 dB Typical Midband
• Impedance: 50 Ohms Nominal
• Maximum Input Power: 400 mW Max, Derated to
85°C @ 3.2 mW/°C
• X Port Current: 50 mA Max.
• MIL-STD-883 Screening Available
Description
Transformers convert the LO and RF paths to
balanced lines connecting to a medium barrier,
Schottky diode ring quad. These transformers help
provide excellent isolation between ports.
Conversion loss is low. The direct connection of the
IF port to the diode quad allows these mixers to be
used as phase detectors and bi-phase modulators.
SF-1
MDS-223
V4
Electrical Specifications1: TA = -55°C to +85°C
Parameter
Test Conditions
Frequency
Frequency Range
RF, LO Ports
IF Port
10 - 500
DC - 500
Conversion Loss
5 - 150 MHz
150 - 500 MHz
Isolation
LO to RF
5 - 150 MHz
150 - 500 MHz
Units
Min
Typ
Max
MHz
—
—
—
MHz
dB
—
—
7.0
dB
—
—
9.0
dB
40
—
—
dB
35
—
—
LO to IF
5 - 150 MHz
dB
35
—
—
150 - 500 MHz
dB
25
—
—
RF to IF
5 - 150 MHz
dB
25
—
—
150 - 500 MHz
dB
20
—
—
DC Polarity
Negative
—
DC Offset
—
—
RF Input
1 dB Compression
—
1 dB Desensitization
—
SSB Noise Figure
Within 1 dB of Conversion Loss
—
Max
—
—
—
—
mV
—
<1
—
dBm
—
+2.5
—
dBm
—
0
—
—
—
—
—
Typical Two-Tone IM with a –10 dBm input, each input,
Ratio
25 MHz and 35 MHz IF
100 - 350 MHz
350 - 500 MHz
dB
—
55
—
dB
—
40
—
1. All specifications apply when operated at +7 dBm available LO power with 50 ohm source and load impedance.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
• North America Tel: 800.366.2266 / Fax: 978.366.2266
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
whatsoever arising out of the use or application of any product(s) or
information.
Visit www.macom.com for additional data sheets and product information.