English
Language : 

M222 Datasheet, PDF (1/2 Pages) Tyco Electronics – Surface Mount Double-Balance Mixer, 200 KHz - 200 MHz
Surface Mount Double-Balanced Mixer,
200 KHz - 200 MHz
MDS-222
V4
Features
• Fully Hermetic Package
• Three Decade Coverage
• Impedance: 50 Ohms Nominal
• Maximum Input Power: 400 mW Max, Derated to
85°C @ 3.2 mW/°C
• X Port Current: 50 mA Max.
• MIL-STD-883 Screening Available
SF-1
Description
Transformers convert the LO and RF paths to
balanced lines connecting to a medium barrier,
Schottky diode ring quad. These transformers help
provide excellent isolation between ports.
Conversion loss is low. The direct connection of the
IF port to the diode quad allows these mixers to be
used as phase detectors and bi-phase modulators.
Pin Configuration
Pin No.
1
Function
GND
Pin No.
3
Function
LO
2
IF
4
RF
Electrical Specifications1: TA = -55°C to +85°C
Parameter
Test Conditions
Frequency
Frequency Range
RF, LO Ports
IF Port
0.2 - 200
DC - 200
Conversion Loss
0.2 - 50 MHz
50 - 200 MHz
Isolation
LO to RF
0.2 - 50 MHz
50 - 200 MHz
Units
Min
Typ
Max
MHz
—
—
—
MHz
dB
—
—
6.0
dB
—
—
7.5
dB
35
—
—
dB
30
—
—
LO to IF
0.2 - 50 MHz
50 - 200 MHz
dB
35
—
—
dB
25
—
—
RF to IF
0.2 - 50 MHz
50 - 200 MHz
dB
25
—
—
dB
20
—
—
DC Polarity
Negative
—
—
—
—
—
DC Offset
RF Input2
—
1 dB Compression
1 dB Desensitization
—
mV
—
<3
—
—
dBm
—
+2
—
—
dBm
—
0
—
SSB Noise Figure
Within 1 dB of Conversion Loss
—
Max
—
—
—
—
Typical Two-Tone IM with a –10 dBm input, each input,
Ratio
25 MHz and 35 MHz IF
100 - 200 MHz
200 - 300 MHz
dB
—
50
—
dB
—
36
—
1. All specifications apply when operated at +7 dBm available LO power with 50 ohm source and load impedance.
2. Measured at 100 MHz.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.