LVR040S Datasheet, PDF (1/2 Pages) Tyco Electronics – PolySwitch PTC Devices Overcurrent Protection Device

Tyco/Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
800-227-4856
FAX [phone]
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: LVR040S
DOCUMENT: SCD 24906
PCN: 336638
REV LETTER: E
REV DATE: MARCH 21, 2003
PAGE NO.: 1 OF 2
Specification Status: RELEASED
Electrical Rating at 20ºC
Rated Operating Voltage: 240 V_AC
Rated Interrupt Current: 5.5 A_RMS
Max Interrupt Voltage: 265 V_AC
Insulating Material :
Cured, Flame Retardant Epoxy Polymer
Meets UL94 V-0 Requirements.
Lead Material: 22 AWG Sn Plated Copper
Marking:
240
L040
Raychem Logo
and Voltage
Part Identification
Lot Identification
(can be on back)
TABLE I. DIMENSIONS:
A
B
MIN MAX MIN MAX
mm:
-- 11.5
--
19.5
in*:
-- (0.46 -- (0.77)
*Rounded off approximation
C
MIN MAX
4.3
5.8
(0.17) (0.23)
D
MIN MAX
7.6
(0.30) --
E
MIN MAX
3.8
-- (0.15)
TABLE II. PERFORMANCE RATINGS:
I_HOLD
RATED
CURRENT RATINGS
CURRENT
AMPS AT
20^oC
HOLD
0.40
HOLD
0.40
AMPS
AT 20^oC
TRIP
0.90
TIME TO TRIP
SECONDS AT
20^oC, 2.0A
MAX
24.0
RESISTANCE
OHMS
AT 20^oC
MIN MAX
0.6
0.97
POST-TRIP
RESISTANCE
STANDARD
TRIP
OHMS
AT 20^oC
MAX
1.9
NOMINAL
TRIPPED
POWER
DISSIPATION
WATTS
AT 20^oC
2.0
Recognitions:
Reference Documents:
Precedence:
Effectivity:
Warning:
UL, TUV recognized.
PS300
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Refer to Page 2 of this document for application limitations.