LVR008S Datasheet, PDF (1/2 Pages) Tyco Electronics – PolySwitch®PTC Devices

Tyco/Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
800-227-4856
FAX [phone]
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: LVR008S
DOCUMENT: SCD 24903
PCN: 029390
REV LETTER: H
REV DATE: JUNE 18, 2003
PAGE NO.: 1 OF 2
Specification Status: RELEASED
Electrical Rating at 20ºC
Rated Operating Voltage: 240 V_AC
Rated Interrupt Current: 1.2 A_RMS
Max Interrupt Voltage: 265 V_AC
Insulating Material :
Cured, Flame Retardant Epoxy Polymer
Meets UL94 V-0 Requirements.
Lead Material: 24 AWG Sn Plated Copper
Marking:
240
L008
Raychem Logo
and Voltage
Part Identification
Lot Identification
(can be on back)
TABLE I. DIMENSIONS:
A
B
MIN MAX MIN MAX
mm:
-- 8.3
--
10.7
in*:
-- (0.33) -- (0.43)
*Rounded off approximation
C
MIN MAX
4.3
5.8
(0.17) (0.23)
D
MIN MAX
7.6
--
(0.30) --
E
MIN MAX
--
3.8
-- (0.15)
TABLE II. PERFORMANCE RATINGS:
I_HOLD
RATED
CURRENT RATINGS
CURRENT
AMPS AT
20^oC
HOLD
0.08
HOLD
0.08
AMPS
AT 20^oC
TRIP
0.19
TIME TO TRIP
SECONDS AT
20^oC, 0.4A
MAX
15.0
RESISTANCE
OHMS
AT 20^oC
MIN MAX
7.4
12.0
POST-TRIP
RESISTANCE
STANDARD
TRIP
OHMS
AT 20^oC
MAX
26.0
NOMINAL
TRIPPED
POWER
DISSIPATION
WATTS
AT 20^oC
0.8
Recognitions:
Reference Documents:
Precedence:
Effectivity:
Warning:
UL, TUV, CSA recognized.
PS300
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Refer to Page 2 of this document for application limitations.