LNH Datasheet, PDF (1/3 Pages) Tyco Electronics – Miniature Power Relay

General Purpose Relays
Miniature Power Relay LN / LNH
I 1 pole 10 A / 16 A, 1 CO or 1 NO contact
I High performance 10 A version (LN1)
I 16 A High capacity version available (LN3)
I Version for HOT-applications (LNH)
I Flux proof
I Plastic materials according to IEC60335-1 (domestic appliances)
I RoHS compliant (Directive 2002/95/EC)
as per product date code 0424
Applications
F0278-A
Domestic appliances
Approvals
V Z REG.-Nr. 40004596,
E214025
Technical data of approved types on request
Contact data
LN1
LN3
LNH
Contact configuration
1 CO or 1 NO 1 CO or 1 NO 1 CO or 1 NO
Contact set
single contact
Type of interruption
micro-disconnection
Rated current
10 A
16 A¹⁾
10 A
Rated voltage / max.switching voltage AC 240/400 VAC 240/400 VAC 240/400 VAC
Maximum breaking capacity AC
2500 VA
4000 VA
2500 VA
Limiting making capacity, max 4 s, df 10%
35 A
35 A
35 A
Contact material
AgSnO2
AgSnO2
AgSnO2
(AgCdO)
Mechanical endurance
10x10⁶ cycles
Rated frequency of operation with / without load
30/300 min^-1
Contact ratings
Type Load
LN1 10 A, 250V, 85 °C, resistive, EN61810-1
LN3 16 A, 250V, 85 °C, resistive, EN61810-1
LNH NO 10 A, 250V, 105 °C, resistive, EN61810-1
LNH NO 8 A, 250V, 105 °C, resistive, EN61810-1
1)
For 16 A at 85°C: coil power reduction to 50% necessary
For 16A with 100% coil power: max. ambient temperature 75°C
For 100% coil power at 85°C: max. contact current 15A
Cycles
250x10³
50x10^{3 1)}
200x10³
250x10³
Coil data
LN1
Rated coil voltage range DC coil
6...48 VDC
Coil power DC coil
typ. 400 mW
Operative range
2
Operative voltage range, % of rated coil voltage
Coil insulation system according UL1446
class F
LN3
6...48 VDC
typ. 400 mW
2
class F
LNH
6...48 VDC
typ. 400 mW
90 - 110%
class F
Coil versions, DC-coil
Coil
Rated
Operate
Release
Coil
Rated coil
code
voltage
voltage
voltage
resistance
power
VDC
VDC
VDC
Ohm
mW
006
6
4.2
0.6
90+10%
400
009
9
6.3
0.9
202+10%
401
012
12
8.4
1.2
360+10%
400
024
24
16.8
2.4
1440+10%
400
036
36
25.2
3.6
3240+10%
400
048
48
33.6
4.8
5760+10%
400
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
Datasheet
Rev. EK1
Issued 2005/11
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
1
‘Schrack’ section.
Specifications subject to
change.