LEV200A4NAF Datasheet, PDF (1/3 Pages) Tyco Electronics – KILOVAC LEV200 Series Contactor With 1 Form X Contacts Rated 500+ Amps, 12-900Vdc

KILOVAC LEV200 Series Contactor With 1 Form X
Contacts Rated 500+ Amps, 12-900Vdc
Product Facts
I Designed to be the lowest cost
sealed contactor in the industry
with its current rating (500+A
carry, 2000A interrupt at
320Vdc).
I Available with bottom or side
mounting -- not position
senstive.
I Optional auxiliary contact for
easy monitoring of power
contact position.
I Hermetically sealed –
intrinsically safe, operates in
explosive/harsh environments
with no oxidation or
contamination of coils or
contacts, including long periods
of non-operation.
I Typical applications include
battery switching and backup,
DC voltage power control, circuit
protection and safety.
I Versatile coil/power
connections.
I Designed and built in
accordance to AIAG QS9000.
For factory-direct application assistance, contact Earle Alldredge, product manager.
Dial 800-253-4560, ext. 2055, or 805-220-2055. Email [e-mail]
RoHS
Ready
Performance Data
Parameter
Units Value for LEV200 Series
Coil Data (valid over temperature range) ^4/
Contact Arrangement, power contacts
1 Form X (SPST-NO-DM)
Nominal Voltage
12Vdc
24Vdc
48Vdc
Rated Operating Voltage
Vdc 12 - 900
Continuous (Carry) Current, Typical
A 500 @ 65°C, 400 mcm conductors
Consult Factory for required conductors for higher (500+ A) currents
Make/Break Current at Various Voltages ^1/ A See next page
Break Current at 320Vdc ^1/
A 2,000, 1 cycle ^3/
Contact Resistance, Typ. (@200A) mohms 0.2
Pickup Voltage (will operate)
Voltage (Max.)
Dropout Voltage
Coil Resistance @ 25° (Typ.)
9.0Vdc
15Vdc
0.75 - 2.0Vdc
11 ohms
19.0Vdc
30Vdc
1.0 - 5.0Vdc
40 ohms
Part Numbering System
38.0Vdc
60Vdc
2.0 - 7.0Vdc
145 ohms
Load Life
Cycles See next page
Mechanical Life
Cycles 100,000
Contact Arrangement, auxiliary contacts
1 Form A (SPST-NO)
Aux. Contact Current, Max.
Aux. Contact Current, Min.
A 2A @ 30Vdc / 3A @ 125Vac
mA 100mA @ 8V
Aux. Contact Resistance, Max.
ohms 0.417@ 30Vdc / .150 @ 125Vaac
Operate Time @ 25°C
Close (includes bounce), Typ.
ms 25
Bounce (after close only), Max.
ms 7
Release (includes arcing), Max @ 2000A ms 12
Dielectric Withstanding Voltage
Vrms 2,200 @ sea level (leakage <1mA)
Insulation Resistance @ 500Vdc megohms 100 ^2/
Shock, 11ms 1/2 sine, peak, operating G 20
Vibration, sine, 80-2000Hz., peak
G 20
Operating Ambient Temperature
°C -40 to +85
Weight, Typical
lb.(kg) 1.3 (.60)
Typical Part Number
LEV200 A 4 N A A
Series:
LEV200 = 500+ Amp, 12-900Vdc Contactor
Contact Form:
A = Normally Open
H = Normally Open with Aux. Contacts. (Option “H” requires
option “A” in Coil Wire Length and option “N” in Coil
Terminal Connector.)
Note: Other auxiliary contact forms available. Consult factory.
Coil Voltage:
4 = 12Vdc
5 = 24Vdc
6 = 48Vdc
K = 72Vdc
8 = 96Vdc
L = 110Vdc O = 115Vac 9 = 240Vac
Notes: Consult factory for detailed specifications and availability of
coils not listed in “Coil Data” table above.
In coil voltage codes, 115Vac is designated by the letter “O”
rather than the numeral “0.”
Coil Wire Length:
A = 15.3 in (390 mm)
N = None (Requires option “A” in next step.)
1/ _{Main power contacts}
2/ _{50 at end of life}
3/ _{Does not meet dielectric & IR after test, 1700 amp for unit with Aux. Contacts}
4/ _{Contacts will operate with 0.8Vnom < Vcoil < 1.1Vnom over temperture range.}
Coil Terminal Connector:
N = None, stripped wires (Requires option “A” in previous step.)
A = Studs, #10-32 Threaded (Electrical connection is made to the tab
at the base of the stud.)
Note: Specify option A, stripped wires, for coil voltages > 96Vdc
Mounting & Power Terminals:
A = Bottom Mount & Male 10mm x M8 Threaded Terminals
F = Side Mount & Male 10mm x M8 Threaded Terminals
© 2007 by Tyco Electronics Corporation. All Rights Reserved.
KILOVAC, TE Logo and Tyco Electronics are trademarks.
Other products and company names mentioned herein may be trademarks of their
respective owners.
Consult factory regarding other available mountings and power terminals.
NOTE: All part numbers are RoHS compliant (and always have been).
1
Catalog 9-1773439-1
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967