JHS-142 Datasheet, PDF (1/1 Pages) Tyco Electronics – Surface Mount Quadrature Hybrid 200 - 400 MHz

Surface Mount Quadrature Hybrid
200 - 400 MHz
JHS-142
Features
q Fully Hermetic
q Octave Bandwidth
q Low VSWR: 1.1:1 Typ.
q Impedance: 50 Ohms Nom.
q Input Power: 5 W. Max. @ 25°C.
Derated to 1 W. @ 85°C
q Typical Phase Linearity: 3° from straight line
q MIL-STD-202 Screening Available
Guaranteed Specifications* (From -55°C to +85°C)
Frequency Range
200 - 400 MHz
Insertion Loss (Less coupling)
0.5 dB Max.**
Isolation
18 dB Min.
Amplitude Balance
1.0 dB Max.
VSWR
1.3:1 Max.
Deviation from Quadrature
4° Max.
V2.00
SF-1
Dimensions in ( ) are in mm.
Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25)
.xx = ±0.02 (.x = ±0.05)
WEIGHT (APPROX.) 0.07 OUNCES 2 GRAMS
Typical Performance
Pin Configuration
A; P1, B; P2, C; P4, D; P3
Case and all other pins are ground.
*All specifications apply with 50 ohm source and load impedance.
**Average of coupled outputs less 3 dB.
This product contains elements protected by United States Patent
Number 3,484,724.
Phasing Diagram
Ordering Information
Part No.
JHS-142 PIN
Package
Surface Mount
M/A-COM Division of AMP Incorporated s North America: Tel. [phone], Fax [phone] s Asia/Pacific: Tel. [phone], Fax [phone]
s Europe: Tel. [phone], Fax [phone]
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
7-46