JHS-115 Datasheet, PDF (1/2 Pages) Tyco Electronics – Surface Mount Quadrature Hybrid 40 - 80 MHz

Surface Mount Quadrature Hybrid
40 - 80 MHz
Features
q Fully Hermetic Package
q 3° Maximum Phase Deviation from 90°
q Low Loss: 0.5 dB Max.
q Impedance: 50 Ohms Nom.
q Input Power: W. Max. Derated to 1 W. @ 100°C
q Typical Phase Linearity: 3° from Straight Line
q MIL-STD-202 Screening Available
SF-1
JH-115/JHS-115
V2.00
Guaranteed Specifications^*
(-55°C to +85°C)
Frequency Range
40 - 80 MHz
Insertion Loss (Less Coupling)
0.5 dB Max.**
Isolation
20 dB Min.
Amplitude Balance
0.8 dB Max.
VSWR
1.2:1 Max.
Deviation from Quadrature
3° Max.
* All specifications apply with 50 Ohm source and load impedance.
** Average of coupled outputs less 3 dB.
Pin Configuration JHS-115
Pin Configuration JH-115
A; P1, B; P2, C; P4, D; P3
A; P1, B; P4, C; P8, D; P5
Phasing Diagram
Dimensions in ( ) are in mm.
Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25)
.xx = ±0.02 (.x = ±0.5)
WEIGHT (APPROX.): 0.07 OUNCES 2 GRAMS
FP-2
PIN 0.015 DIA ±0.005
(0.038 ±0.13)
8 PLACES
123 4
5 67 8
0.312 MIN TYP
(7.9 MIN)
0.385 ± 0.020
(9.8 ± 0.5)
0.080 (2.0)
0.100 (2.5)
0.250 (6.3)
0.51
(12.9 ±0.5)
0.350 (8.9)
0.150 MAX
(3.8 MAX)
0.060 (1.5)
Ordering Information
P^Oar^rt^dN^eum^ribⁿe^gr ^information
JH-115 PIN
JHS-115 PIN
Package
Flatpack
Surface Mount
Dimensions in ( ) are in mm.
Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25)
.xx = ±0.02 (.x = ±0.5)
WEIGHT (APPROX.): 0.09 OUNCES 2.5 GRAMS
M/A-COM Division of AMP Incorporated s North America: Tel. [phone], Fax [phone] s Asia/Pacific: Tel. [phone], Fax [phone]
s Europe: Tel. [phone], Fax [phone]
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
7-30