FEMTOSMDC016F-02 Datasheet, PDF (1/1 Pages) Tyco Electronics – Specification Status: Released

308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: [phone]
www.circuitprotection.com
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: femtoSMDC016F
DOCUMENT: SCD27724
REV LETTER: B
REV DATE: MAY 9, 2011
PAGE NO.: 1 OF 1
Specification Status: Released
Maximum Electrical Rating
Voltage: 9.0V_DC
Short Circuit Current: 40A
Notes:
1. All terminations are Tin plated.
2. Drawing not to scale
Marking: E
TABLE I. DIMENSIONS:
A
B
C
D
E
MIN MAX MIN MAX MIN MAX MIN MAX MIN
mm: 1.40 1.80 0.35 0.75 0.60 1.00 0.10 0.50 0.075
in: (0.055) (0.071) (0.013) (0.030) (0.023) (0.039) (0.004) (0.020) (0.003)
TABLE II. PERFORMANCE RATINGS:
CURRENT RATINGS**
AMPERES AMPERES
AT 0°C
AT 25°C
HOLD TRIP HOLD TRIP
0.18 0.45 0.16 0.40
AMPERES
AT 60°C
HOLD TRIP
0.11 0.28
AMPERES
AT 85°C
HOLD TRIP
0.07 0.17
TIME TO
TRIP**
SECONDS
AT 25°C, 1.0A
MAX
0.1
RESISTANCE TRIPPED-STATE
VALUES
POWER
DISSIPATION**
OHMS
WATTS AT
AT 25°C
25°C, 9.0V
MIN MAX*
MAX
1.00 4.20
0.5
* Maximum resistance is measured 1 hour after reflow.
** Values specified were determined using PCB’s with 0.030”x1.0 ounce copper traces.
Agency Recognitions:
UL, CSA
Reference Documents: PS300
Precedence:
This specification takes precedence over documents referenced herein.
Effectivity:
Reference documents shall be the issue in effect on the date of invitation for bid.
Caution:
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ROHS Compliant
ELV Compliant
Pb-Free
Halogen Free*
HF
* Halogen Free refers to: Br≤900ppm, Cl≤900ppm, Br+Cl≤1500ppm.
© 2009, 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All rights reserved.