FDC2310 Datasheet, PDF (1/3 Pages) Tyco Electronics – Open Carrier Frequency Doubler For Microwave Telecommunications

Open Carrier Frequency Doubler
For Microwave Telecommunications
Features
• Input Frequency 1.5 to 8.0 GHz
• Output Frequency 3.0 to 16.0 GHz
• Input Drive Level +10 dBm (nominal)
• Microstrip Interface
Description
The FDC2310 is a passive bridge diode frequency doubler, de-
signed for use in military, commercial and test equipment applica-
tions. The design utilizes Schottky bridge quad diodes and broad-
band soft dielectric baluns to attain excellent performance. Envi-
ronmental screening available to MIL-STD-883, MIL-STD-202, or
MIL-DTL-28837, consult factory.
Product Image
Ordering Information
Part Number
FDC2310
Package
Open Carrier
FDC2310
V1
Electrical Specifications: Z₀ = 50Ω P_in = +10 dBm
Parameter
Test Conditions
Typical
Units
SSB Conversion Loss
(max)
Fundamental
Suppression (min)
Third Harmonic
Suppression (min)
Input VSWR
f_in = 1.5 to 8.0 GHz
f_in = 1.5 to 8.0 GHz
f_in = 1.5 to 8.0 GHz
f_in = 1.5 to 8.0 GHz
dB
11
dBc
35
dBc
40
2.0:1
Guaranteed
+25ºC -40º to +85ºC
14.0
14.5
19.5
19
20
18
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.