FD25H_1 Datasheet, PDF (1/3 Pages) Tyco Electronics – Frequency Doubler

Frequency Doubler
Features
• IINPUT: 5 TO 2400 MHz
• OUTPUT: 10 TO 4800 MHz
• INPUT DRIVE LEVEL +23 dBm (NOMINAL)
• HERMETICALLY-SEALED PACKAGE
Description
The FD25H is a passive bridge diode frequency doubler, de-
signed for use in the high volume commercial and test equipment
applications. The design utilizes Schottky bridge quad diodes and
broadband baluns to attain excellent performance. The use of
high temperature solder and welded assembly processes used
internally makes it ideal for use in semi-automated and automated
assembly. Environmental screening available to MIL-STD-883,
MIL-STD-202, or MIL-DTL-28837, consult factory.
Ordering Information
Product Image
FD25H/FD25HC/SFD25H
V2
Part Number
FD25H
FD25HC
SFD25H
Package
TO-8
SMA Connectorized
Surface Mount
Electrical Specifications: Z₀ = 50Ω P_in = +23 dBm
Parameter
Test Conditions
Units
Typical
SSB Conversion Loss
(max)
f_in = 5 to 2400 MHz
dB
12.0
Guaranteed
+25ºC -54º to +85ºC*
13.5
13.8
Fundamental
Suppression (min)
Third Harmonic
Suppression
Input VSWR
f_in = 5 to 1000 MHz
f_in = 1000 to 2000 MHz
f_in = 2000 to 2400 MHz
f_in = 5 to 500 MHz
f_in = 500 to 2400 MHz
f_in = 5 to 2400 MHz
dBc
35
25
24
dBc
25
20
19
dBc
20
16
15
dBc
40
30
29
dBc
35
25
24
1.5:1
* The FD25HC specification limits apply at 0ºC to +50ºC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.