FCA-325-BZ4 Datasheet, PDF (1/4 Pages) Tyco Electronics – Tyco Electronics Mid-Range Military/Aerospace Relays 10 AMPERES, DPDT

SERIES
FCA-210
Tyco Electronics Mid-Range Military/Aerospace Relays
10 AMPERES, DPDT
q HERMETICALLY SEALED
q ALL WELDED CONSTRUCTION
q BALANCED FORCE
q PERMANENT MAGNET DRIVE
q CONTACTS: SILVER CADMIUM
OXIDE WITH GOLD PLATING
q COILS FOR DC, 50 TO 400Hz AND 400Hz AC
q WEIGHT 1.6 OUNCES MAX. (45.4 GRAMS)
Q_Q^P_ua^L_lifi^A_ed^P_to^{PMRILO-R-V83E53D6}
The Series FCA-210 relay is a polarized single-side stable design, where the flux from a permanent
magnet provides the armature holding force in the deactivated state, and its flux path is switched
and combined with the coil flux in the operated state. This results in appreciably increased contact
pressure in both states over that of a spring return nonpolar design. We also manufacture other
versions of this relay:
FCA-410: 10 AMPERE 4PDT RELAY
FCA-610: 10 AMPERE 6 PDT RELAY
AVAILABLE
FCA-215: 15 AMPERE DPDT RELAY, HAS THE SAME SPECIFICATIONS AS THE FCA-210
EXCEPT IS RATED AT 15 AMPS.
CONTACT RATING-AMPERES
Ratings Are Continuous Duty
TYPE OF
LOAD
LIFE (MIN.)
CYCLES X 10³
28 VDC
Resistive
100
10
Inductive
20
8
Motor
100
4
Lamp
100
2
115VAC
400Hz
10
8
4
2
115/200VAC 30
400 Hz 60Hz *
10
2.5
8
2.5
4
2.0
2
1
* 60 Hz LOADS RATED FOR 10,000 OPERATIONS
OVERLOAD CURRENT 40 AMPS DC, 60AMPS 400Hz
RUPTURE CURRENT 50 AMPS DC, 80 AMPS 400Hz
CONTACT MAKE BOUNCE 1 MILLISECOND AT NOMINAL VOLTAGE
MAX. CONTACT DROP AT 10 AMPS: INITIAL 0.100 VOLTS.
END OF LIFE 0.125 VOLTS
8