ETC1.6-4-2-3 Datasheet, PDF (1/2 Pages) Tyco Electronics – E-Series RF 1:4 Transmission Line Step-up Transformer 500 - 2500 MHz

E-Series RF 1:4 Transmission Line Step-up Transformer
500 – 2500 MHz
Features
• 1:4 Impedance Ratio
• CT on Secondary
• Surface Mount
• Tape and reel packaging available
Description
M/A-COM’s ETC1.6-4-2-3 is a 4:1 RF transmission
line step-up transformer in a low cost, surface mount
package. Ideally suited for high volume cellular and
wireless applications. Typical applications include
single to balanced mode conversion and impedance
matching. Parts are packaged in tape & reel.
SM - 22 Package
ETC1.6-4-2-3
V3
Electrical Specifications: T_A = 25°C, Z₀ = 50Ω ¹
Parameter
RF Frequency
Insertion Loss
Test Conditions
—
F_L—f_U
Frequency
500 - 2500
500 - 750
750 - 1200
1200 - 2500
Units
Min
Typ
Max
MHz
—
—
—
dB
—
—
3.0
dB
—
—
1.0
dB
—
—
3.0
Absolute Maximum Ratings ¹
Parameter
DC Power
DC Current
Operating Temperature
Storage Temperature
Absolute Maximum
250 mW
30 mA
-40°C to +85°C
-55°C to +125°C
1. Operation of this device above any one of these parameters
may cause permanent damage.
Ordering Information
Part Number
ETC1.6-4-2-3TR
Package
Tape and Reel (2000 piece Reel)
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.