ETC1-1T_1 Datasheet, PDF (1/2 Pages) Tyco Electronics – E-Series RF 1:1 Flux Coupled Transformer 3 - 200 MHz

E-Series RF 1:1 Flux Coupled Transformer
3 – 200 MHz
Features
• 1:1 Impedance Ratio
• CT on Secondary
• Surface Mount
• Tape and reel packaging available
Description
M/A-COM’s ETC1-1T is a 1:1 RF flux coupled
transformer in a low cost, surface mount package.
Ideally suited for high volume applications. Parts are
packaged in tape & reel.
SM - 22 Package
ETC1-1T
V10
Electrical Specifications: T_A = 25°C, Z₀ = 50Ω ¹
Parameter
Test Conditions
Frequency
RF Frequency
—
Insertion Loss
—
3 - 200
3 - 200
Amplitude Imbalance
—
Phase Imbalance
—
Input Return Loss
—
3 - 50
3 - 200
3 - 50
3 - 200
3 - 200
5 - 120
Units
Min
MHz
—
dB
—
dB
—
dB
—
Degrees
—
Degrees
—
dB
—
dB
—
Typ
—
—
—
—
—
—
—
—
Max
—
1.5
0.1
0.5
1.0
5.0
10.0
15.0
Absolute Maximum Ratings ¹
Ordering Information
Parameter
RF Power
DC Current
Operating Temperature
Storage Temperature
Absolute Maximum
250 mW
240 mA²
-40°C to +85°C
-55°C to +125°C
1. Operation of this device above any one of these parameters
may cause permanent damage.
2. The maximum DC current applies to the secondary center tap
in applications where the secondary is balanced.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Part Number
ETC1-1TTR
Package
Tape and Reel (2000 piece Reel)
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.