ETC1-1T-5_1 Datasheet, PDF (1/2 Pages) Tyco Electronics – E-Series 1:1 Transformer 2 - 500 MHz

E-Series RF 1:1 Transformer
2 – 500 MHz
Features
• 1:1 Impedance Ratio
• Surface Mount
• Tape and reel packaging available
Description
M/A-COM’s ETC1-1T-5 is a 1:1 RF transformer in a
low cost, surface mount package. Typical
applications include single to balanced mode
conversion and impedance matching. Parts are
packaged in tape & reel.
SM - 22 Package
ETC1-1T-5
V1
Electrical Specifications: T_A = 25°C, Z₀ = 50Ω ¹
Parameter
RF Frequency
Insertion Loss
Amplitude Imbalance
Phase Imbalance
Test Conditions
—
—
—
—
Frequency
2 - 500
2 - 300
2 - 500
2 - 300
2 - 500
2 - 300
2 - 500
Units
Min
Typ
Max
MHz
—
—
—
dB
—
—
1.0
2.0
dB
—
—
0.3
dB
—
—
0.6
Degrees
—
—
2.0
Degrees
—
—
5.0
Absolute Maximum Ratings ¹
Parameter
RF Power
DC Current
Operating Temperature
Storage Temperature
Absolute Maximum
250 mW
240 mA²
-40°C to +85°C
-55°C to +125°C
1. Operation of this device above any one of these parameters
may cause permanent damage.
2. The maximum DC current applies to the secondary center tap
in applications where the secondary is balanced.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Ordering Information
Part Number
ETC1-1T-5TR
Package
Tape and Reel (2000 piece Reel)
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.