ETC1-1T-2 Datasheet, PDF (1/2 Pages) Tyco Electronics – E-Series RF 1:1 Transformer 0.05 - 3 MHz

E-Series RF 1:1 Transformer
0.05 – 3 MHz
Features
• 1:1 Impedance Ratio
• Surface Mount
• Tape and reel packaging available
Description
M/A-COM’s ETC1-1T-2 is a 1:1 RF transformer in a
low cost, surface mount package. Typical
applications include single to balanced mode
conversion and impedance matching. Parts are
packaged in tape & reel.
SM - 22 Package
ETC1-1T-2
V2
Electrical Specifications: T_A = 25°C, Z₀ = 50Ω ¹
Parameter
Test Conditions
RF Frequency
—
Insertion Loss
—
—
Amplitude Imbalance
—
—
Phase Imbalance
—
—
Absolute Maximum Ratings ¹
Parameter
RF Power
DC Current
Operating Temperature
Storage Temperature
Absolute Maximum
250 mW
30 mA
-40°C to +85°C
-55°C to +125°C
1. Operation of this device above any one of these parameters
may cause permanent damage.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Frequency
Units
Min
Typ
Max
0.05 - 3
MHz
—
—
—
0.05 - 3
0.2 - 3
0.05 - 3
0.2 - 3
0.05 - 3
0.2 - 3
dB
—
—
2.0
dB
—
—
1.0
dB
—
—
0.2
dB
—
—
0.1
Degrees
—
—
2°
Degrees
—
—
1°
Ordering Information
Part Number
ETC1-1T-2TR
Package
Tape and Reel (2000 piece Reel)
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.